couplers

[NW Modeling List]

James,
Thanks for the info.  I will soon post a video o f the G-12 constriction
process.  In short it is a Weterfield/F&C  contest type kit with lots of
tedious small part additions to the 3D printed body so be prepared to
invest some time.
Jim

On Wed, Sep 4, 2024 at 10:23 AM NW Modeling List <nw-modeling-list at nwhs.org>
wrote:

> Jim,
>
> You might try the Kadee 158 scale head coupler.  I have been using these
> on all my new models.
> Please provide more info on this model as I have yet to order one but do
> want one or two.
>
> On Sep 4, 2024, at 03:10, NW Modeling List <nw-modeling-list at nwhs.org>
> wrote:
>
> I am finishing construction on a Plate C, 3D printed G=12 gondola kit and
> when I added the draft gear to the underframe, the coupler box
> looked narrow.  Upon measurement, it turns out to be about 5mm wide while a
> box that accommodates a Kadee #5 seems to be in the 7-8mm range.  Are there
> "narrow" couplers out there that will fit in the 5mm boxes?  What are
> my options?
> Thanks,
> Jim Cochran
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
>
>
> James Wall
> Rural Hall, NC
>
>
>
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20240904/83a9b996/attachment.htm>