couplers

[NW Modeling List]

Jim,

You might try the Kadee 158 scale head coupler.  I have been using these on all my new models. 
Please provide more info on this model as I have yet to order one but do want one or two.

> On Sep 4, 2024, at 03:10, NW Modeling List <nw-modeling-list at nwhs.org> wrote:
> 
> I am finishing construction on a Plate C, 3D printed G=12 gondola kit and when I added the draft gear to the underframe, the coupler box looked narrow.  Upon measurement, it turns out to be about 5mm wide while a box that accommodates a Kadee #5 seems to be in the 7-8mm range.  Are there "narrow" couplers out there that will fit in the 5mm boxes?  What are my options?
> Thanks,
> Jim Cochran
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/

James Wall
Rural Hall, NC



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20240904/9ca15737/attachment.htm>