couplers

[NW Modeling List]

I am finishing construction on a Plate C, 3D printed G=12 gondola kit and
when I added the draft gear to the underframe, the coupler box
looked narrow.  Upon measurement, it turns out to be about 5mm wide while a
box that accommodates a Kadee #5 seems to be in the 7-8mm range.  Are there
"narrow" couplers out there that will fit in the 5mm boxes?  What are
my options?
Thanks,
Jim Cochran
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20240904/ec8dbc2d/attachment.htm>