Converting Broadway Y6b to Y6a ... how easy?

Sat Feb 8 13:06:26 EST 2020

Jon,
Sounds like a well thought out project we would all be interested in seeing. Perhaps you could do an article for the Arrow or maybe here?
Roger HuberDeer Creek Locomotive Works 

    On Saturday, February 8, 2020, 11:00:38 AM CST, NW Modeling List <nw-modeling-list at nwhs.org> wrote:  

 I started a conversion of a BLI Y6b into a Y6a a few months ago. I haven't finished all the little details, but I did go ahead and paint it. I cut the smoke box down with a cut off wheel on a dremel tool and rejoined it to the boiler. The down side is I ran out of room for the smoke unit to fit inside, so it got left out. I cut the catwalks and moved them around, moved the air compressor, mounted the feedwater heater and ran some piping to and from it. I practiced on an old rivarossi y6b first before sacrificing an expensive BLI. There's more I want to do to it, but for now, I'm happy with it.
Jon Jones
On Sat, Feb 8, 2020, 10:19 AM NW Modeling List <nw-modeling-list at nwhs.org> wrote:

OK

 On 2/7/2020 5:07 PM, NW Modeling List wrote:

 I didn't attach any files to my email. 

 Nigel Misso 

 Sent from Xfinity Connect Application

 -----Original Message-----

 From: nw-modeling-list at nwhs.org
 To: nw-modeling-list at nwhs.org
 Sent: 2020-02-07 12:49:23 PM 
 Subject: Re: Converting Broadway Y6b to Y6a ... how easy?

Nigel, I have been lurking along on this thread, to see if I might try the conversion myself.  What kind of file is your attachment?  I couldn't open it.  Thanks

Walter Davis, Youngsville, NC

 On 2/7/2020 6:47 AM, NW Modeling List wrote:

 Jim, smokebox length is another item. Compare your model with pictures of 2156. I suggest downloading some 2156 pictures, then taking matching pictures of your model. Then comparing the areas that are identified as being different by you and other sources to decide if those differences are important to you. 

 Nigel Misso 

 Sent from Xfinity Connect Application

 -----Original Message-----

 From: nw-modeling-list at nwhs.org
 To: nw-modeling-list at nwhs.org
 Sent: 2020-02-06 4:25:38 PM 
 Subject: Converting Broadway Y6b to Y6a ... how easy?

I’d like to convert 1 of my Broadway Y6b’s to an “a”.  I’ve not studied differences closely (yet) so haven’t made the yes/no decision to move forward.  Other than the “elephants in the room” changes (replacing the left side pumps with a feedwater heater, adding the 2nd pump on the right, removing the fwh ahead of the stack, changing some piping/air tanks, etc.) can this conversion be done using the same boiler, cab, pilot and running gear?  I have a brass FWH for the left side and can get other parts from Cal-Scale/Bowser or ebay so necessary parts are easily available and lesser parts can be scratchbuilt.

Jim King

http://smokymountainmodelworks.com/

  ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ 

  ________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

 ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ 

  ________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

 ________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200208/d0ce7b7e/attachment.html>