N&W T6 project

NW Modeling List nw-modeling-list at nwhs.org
Fri Feb 1 17:20:12 EST 2019


Looking at your email closer I use a CVP easy DCC system to program decoders. There has NOT been a decoder that this system has not been able to program. I use Lenz system on the main and all decoders program well on the main (POM mode) with out a hitch.
 I do have decoder pro set up on my laptop but prefer to use the Easy DCC system as  their speed curves are great and load easily


From: NW-Modeling-List <nw-modeling-list-bounces at nwhs.org> on behalf of NW Modeling List <nw-modeling-list at nwhs.org>
Sent: Friday, February 1, 2019 7:21 PM
To: nw-modeling-list at nwhs.org
Subject: N&W T6 project

My first conversion to battery ops will be an Alco Models T-6.  I have NWSL can motor and Delrin U-joint kits and plan to install the most accurate sound decoder.  I’ve heard the online audio sample for Loksound’s small Alco (sounds pretty good) but need to hear from y’all re: other suppliers.  Ease of CV programming is a must … the CVP T5000 throttle can handle all major decoders but I’ve read that Loksound requires “different” programming than WOW and TSU.

Your comments, please.  If I can make this basket case model into something to be proud of, I’ll go hunting for a 2nd and run them back to back.

Jim King


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20190201/751ed075/attachment.html>

More information about the NW-Modeling-List mailing list