K-2 question

NW Modeling List nw-modeling-list at nwhs.org
Sat Mar 11 08:54:54 EST 2017


Jim,
Precision Scale Company may have drivers for the Sunset K2. All brass construction. May require more work but could be a little cheaper.

Very Respectfully,
Joseph Congemi

> On Mar 10, 2017, at 12:14, NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org> wrote:
> 
> Harold
>  
> Hope you write up an article for the magazine detailing all that you are doing with this engine.
> Sunset still has the drivers but at $150 a pop I will probably think about it for awhile.
> Right now I don't even have track to run this thing!
>  
> Jim
>  
>  
> -----Original Message-----
> From: NW Modeling List <nw-modeling-list at nwhs.org>
> To: NW Modeling List <nw-modeling-list at nwhs.org>
> Sent: Fri, Mar 10, 2017 7:26 am
> Subject: Re: K-2 question
> 
> Jim: I have installed the larger drivers on my K2 and he engine looks much better. Also I would like to install spoked pilot wheels but have not yet. The bell was not installed under the steps as on the model but on the pilot beam with a plain steel strap bracket.  However, if you keep the bell on the pilot beam you should not have spoked pilot wheels and will have to add the cooling grills to each side of the front cowling.  I plan to return the bell to the top of the boiler after I finish replacing the top of the skyline cowling which on my engine is miss-shaped .    
> 
> Harold Davenport 
> 
> From: NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org>
> To: nw-modeling-list at nwhs.org 
> Cc: NW Modeling List <nw-modeling-list at nwhs.org>
> Sent: Monday, March 6, 2017 1:10 PM
> Subject: Re: K-2 question
> 
> Jimmy
>  
> I'll have to take another look at it. Wonder if anyone has installed the replacement drivers that Sunset offered some time back?
> Also it would be neat to install spoked lead truck wheels.
>  
> Jim Kehn
>  
>  
> -----Original Message-----
> From: NW Modeling List <nw-modeling-list at nwhs.org>
> To: NW Modeling List <nw-modeling-list at nwhs.org>
> Sent: Mon, Mar 6, 2017 8:34 am
> Subject: Re: K-2 question
> 
> On 3/5/2017 1:09 PM, NW Modeling List via NW-Modeling-List wrote:
> I decided to leave the bell under the pilot but may substitute a smaller bell or reposition it. Looking at the top it would be a pain to try and put it there,
> 
> Jim,
>     It wouldn't be hard to put the bell up on top as the area up there is wide open. You just need the correct part from PSC.
> 
> Jimmy Lisle
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
> 
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
> 
> 
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20170311/3fbe2300/attachment.html>


More information about the NW-Modeling-List mailing list