Baggage car samples

[NW Modeling List]

Thanks, Ed. I hadn't thought about how the trucks work - just how they look.
Anyway, I think DP has used the PRR style truck which was on the M1. This is
not correct for the BEj.   Jim Nichols

 

From: nw-modeling-list-bounces at nwhs.org
[mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List
Sent: Tuesday, February 02, 2010 10:52 PM
To: NW Modeling List
Subject: Re: Baggage car samples

 

The leaf spring is poorly depicted in these trucks.  Jim - it isn't supposed
to contact the equalizer; the bottom of the leaf spring rides on a spring
plank suspended from the side frames by swing hangers.  The side frames are
connected together by cross members outboard of the leaf springs and the
swing hangers are suspended from those cross members.  But the leaf spring
could be extended far enough inboard of the equalizer so that you wouldn't
have that objectionable open space there.  The leaf springs were in series
with the springs between the equalizers and the side frames.

 

EdKing

 

From: NW <mailto:nw-modeling-list at nwhs.org>  Modeling List 

Sent: Tuesday, February 02, 2010 10:44 PM

To: 'NW <mailto:nw-modeling-list at nwhs.org>  Modeling List' 

Subject: RE: Baggage car samples

 

The "new" color appears to be a little better than the original. Ditto the
roof. Having held Grant Carpenter's M1 in my hands, I would agree that the
red is a little lighter than I would prefer and the roof color is really not
acceptable. So Division Point appears to be going in the right direction.
Trucks look a little funny - why doesn't the leaf spring contact the
equalizer (lower member)?     Jim Nichols

 

From: nw-modeling-list-bounces at nwhs.org
[mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List
Sent: Tuesday, February 02, 2010 5:00 PM
To: nw-modeling-list at nwhs.org
Subject: FW: Baggage car samples

 

Subject: Baggage car samples


Here are photos of the N&W BEj baggage car production samples by Division
Point.
First photo is a color comparison photo .Comments?

Regards,
Stephen Rineair



Ken Johnson (General Manager)
Division Point, Inc.
Featuring fine brass models imported from Korea
E-mail replies to: orders at divisionpoint.com . . . . Visit us at
www.divisionpoint.com <http://www.divisionpoint.com/>  
Orders: 303-499-5910        Fax: 303-499-4539

  _____  

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20100203/a79f6d6c/attachment.html>