Baggage car samples

NW Modeling List nw-modeling-list at nwhs.org
Wed Feb 3 11:37:12 EST 2010


Jim - even the old Walthers O-scale trucks, crude as they were, were obviously made by folks who understood the prototype.

Oh, to have Central Valley back . . .

Ed


From: NW Modeling List
Sent: Wednesday, February 03, 2010 10:50 AM
To: 'NW Modeling List'
Subject: RE: Baggage car samples


Thanks, Ed. I hadn't thought about how the trucks work - just how they look. Anyway, I think DP has used the PRR style truck which was on the M1. This is not correct for the BEj. Jim Nichols



From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List
Sent: Tuesday, February 02, 2010 10:52 PM
To: NW Modeling List
Subject: Re: Baggage car samples



The leaf spring is poorly depicted in these trucks. Jim - it isn't supposed to contact the equalizer; the bottom of the leaf spring rides on a spring plank suspended from the side frames by swing hangers. The side frames are connected together by cross members outboard of the leaf springs and the swing hangers are suspended from those cross members. But the leaf spring could be extended far enough inboard of the equalizer so that you wouldn't have that objectionable open space there. The leaf springs were in series with the springs between the equalizers and the side frames.



EdKing



From: NW Modeling List

Sent: Tuesday, February 02, 2010 10:44 PM

To: 'NW Modeling List'

Subject: RE: Baggage car samples



The "new" color appears to be a little better than the original. Ditto the roof. Having held Grant Carpenter's M1 in my hands, I would agree that the red is a little lighter than I would prefer and the roof color is really not acceptable. So Division Point appears to be going in the right direction. Trucks look a little funny - why doesn't the leaf spring contact the equalizer (lower member)? Jim Nichols



From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List
Sent: Tuesday, February 02, 2010 5:00 PM
To: nw-modeling-list at nwhs.org
Subject: FW: Baggage car samples



Subject: Baggage car samples


Here are photos of the N&W BEj baggage car production samples by Division Point.
First photo is a color comparison photo .Comments?

Regards,
Stephen Rineair



Ken Johnson (General Manager)
Division Point, Inc.
Featuring fine brass models imported from Korea
E-mail replies to: orders at divisionpoint.com . . . . Visit us at www.divisionpoint.com
Orders: 303-499-5910 Fax: 303-499-4539


--------------------------------------------------------------------------------

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/



--------------------------------------------------------------------------------


________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20100203/3ff599dc/attachment.html>


More information about the NW-Modeling-List mailing list