Wig Wag Crossing Signals

[nw-modeling-list at nwhs.org]

Andre (and others!),
  That wig wag signal was taken out 1934ish when Route 11 was built over top of the railroad with a bridge.  It was about 500 feet east of where the highway now crosses over top the railroad.  Most all traces of the original Route 11 path are now gone, and I had a hard time identifying the location.
   
  If you're modeling 1950's N&W around Chilhowie, you won't need one there.  I don't know what kind was at the crossing at the milling company.  But, don't forget the Esso distributor tied in with it!
   
  Ben Blevins
  

nw-modeling-list at nwhs.org wrote:
          So, BB:
  How long did this wig-wag stay in service and how far east/west of Chilhowie was it.
  BTW, I'm finishing a roughly kitbashed/scratchbuilt version of Chilhowie milling in HO. It's rough because I couldn't find good, close-up photos of the structure.
  Pls. advise, and Happy Labor Day.
  Andre Jackson and/or Lisa Burrows
Life is short; update your anti-virus software
    ----- Original Message ----- 
  From: nw-modeling-list at nwhs.org 
  To: N and W Modeling List 
  Sent: Monday, September 04, 2006 7:51 AM
  Subject: Re: Wig Wag Crossing Signals
  

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list


 		
---------------------------------
Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20060904/502b5da9/attachment.htm