N&W RPOs M1

NW Modeling List nw-modeling-list at nwhs.org
Sat Aug 3 11:25:04 EDT 2024


That is amazing, if you ever make that I'm in.
David Baker


On Fri, Aug 2, 2024, 8:45 PM NW Modeling List <nw-modeling-list at nwhs.org>
wrote:

> A few of you know, this is on my short list to 3d model and print. I did
> complete the car side last year, and decided I would prefer to make a
> complete car rather than attach a car side to an inaccurate donor core. I
> sort of stopped because I wasn't sure how to model the complex curves of
> the roof ends, but that has been resolved. If you can be patient, maybe I
> can knock it out after I finish my major caboose project. (painting and
> detailing a bunch of brass CF/CH/C3 cabins)
>
> [image: image.png]
>
> I did a couple test prints, but didn't support it well enough which led to
> the close corner warping that you see below.
> However, you can see that it prints very well overall, and with better
> supports this would be a non-issue.
>
> [image: image.png]
>
> Mike Rector
>
>
>
>
> On Fri, Aug 2, 2024 at 11:27 AM NW Modeling List <
> nw-modeling-list at nwhs.org> wrote:
>
>> Hi,
>>
>> Thanks, I'll poke around for M70 kits. Don't get me wrong, I'd love a
>> real model but a stand-in must do for some equipment you can't really buy
>> as it's too rare. Lol if anyone wants to get rid of one ... I've got some
>> K1s and K2s that would be happy to pull them.
>>
>> I've leaned enough through the society to try and get a better balance of
>> mail/storage vs. express.
>>
>> :)
>>
>> David Baker
>>
>> On Fri, Aug 2, 2024, 8:07 AM NW Modeling List <nw-modeling-list at nwhs.org>
>> wrote:
>>
>>> David,
>>> If a stand-in will do, you might watch E-bay for a Walthers 7831.  It
>>> was an M1, but the lapse of 60 or so years has rendered it "crude" by
>>> today's standards.
>>> Jim Cochran
>>>
>>> On Fri, Aug 2, 2024 at 7:22 AM NW Modeling List <
>>> nw-modeling-list at nwhs.org> wrote:
>>>
>>>> Hi,
>>>> Thanks for the info. Only done in brass probably means it would take
>>>> ten years to even find one, hmmm it looks a bit like the PRR M70. Perhaps
>>>> I'll use that as a a stand in.
>>>> Thanks!
>>>> David Baker
>>>>
>>>>
>>>>
>>>> On Fri, Aug 2, 2024, 7:09 AM NW Modeling List <
>>>> nw-modeling-list at nwhs.org> wrote:
>>>>
>>>>> The M1 has been dine in brass.
>>>>>
>>>>> Jim Nichols
>>>>>
>>>>> On Thursday, August 1, 2024 at 09:32:12 PM EDT, NW Modeling List <
>>>>> nw-modeling-list at nwhs.org> wrote:
>>>>>
>>>>>
>>>>> Hi Society,
>>>>> Were there any N&W RPOs done in HO? Specifically the M1 or something
>>>>> that was not a combination RPO?
>>>>> Thanks for sharing the knowledge,
>>>>> David Baker
>>>>> ________________________________________
>>>>> NW-Modeling-List at nwhs.org
>>>>> To change your subscription go to
>>>>> http://list.nwhs.org/mailman/options/nw-modeling-list
>>>>> Browse the NW-Modeling-List archives at
>>>>> http://list.nwhs.org/pipermail/nw-modeling-list/
>>>>> ________________________________________
>>>>> NW-Modeling-List at nwhs.org
>>>>> To change your subscription go to
>>>>> http://list.nwhs.org/mailman/options/nw-modeling-list
>>>>> Browse the NW-Modeling-List archives at
>>>>> http://list.nwhs.org/pipermail/nw-modeling-list/
>>>>>
>>>> ________________________________________
>>>> NW-Modeling-List at nwhs.org
>>>> To change your subscription go to
>>>> http://list.nwhs.org/mailman/options/nw-modeling-list
>>>> Browse the NW-Modeling-List archives at
>>>> http://list.nwhs.org/pipermail/nw-modeling-list/
>>>>
>>> ________________________________________
>>> NW-Modeling-List at nwhs.org
>>> To change your subscription go to
>>> http://list.nwhs.org/mailman/options/nw-modeling-list
>>> Browse the NW-Modeling-List archives at
>>> http://list.nwhs.org/pipermail/nw-modeling-list/
>>>
>> ________________________________________
>> NW-Modeling-List at nwhs.org
>> To change your subscription go to
>> http://list.nwhs.org/mailman/options/nw-modeling-list
>> Browse the NW-Modeling-List archives at
>> http://list.nwhs.org/pipermail/nw-modeling-list/
>>
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20240803/121bf77a/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 517920 bytes
Desc: not available
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20240803/121bf77a/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 2341072 bytes
Desc: not available
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20240803/121bf77a/attachment-0003.png>


More information about the NW-Modeling-List mailing list