Caboose in Commissary

[NW Modeling List]

 Hi Jack;
I have built three, although I am not a rivet counter I did add detail and
changed the end ladders. This is a laser cut wooden kit is from American
Model Builders, kit 864.  I used Tahoe Model Works Bttendorf Swing Motion
caboose trucks TMW-104, or Barber-Bettendorf swing Motion caboose trucks
TMW-105. Thebkits can be challenging, but if you take your time and keep
with the instructions they build up into a nice model. The picture is
before the end ladders have been added and roof grabs have been added to
two.
Larry Brown

Moderator:
https://www.nwhs.org/mailinglist/2018/20180720.20180221_213121.jpg


On Fri, Jul 20, 2018, 4:14 PM NW Modeling List via NW-Modeling-List <
nw-modeling-list at nwhs.org> wrote:

>
> I see in the Commissary that a Model-CF Wood Caboose Kit is available, but
>> comes without trucks or couplers.  I have never build any rolling stock
>> before.  Is this difficult to build?  What trucks would I need for this
>> caboose and where would I find them?  Thanks for your help.
>>
>>
>> Jack Fletcher* ​*
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20180720/1f28becb/attachment.html>