sound decoder ?

NW Modeling List nw-modeling-list at nwhs.org
Wed Oct 28 17:04:08 EDT 2015


Thanks Ray, you have most helpful! I can't thank you enough.

Stephen Rineair

 

From: NW-Modeling-List [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf
Of NW Modeling List via NW-Modeling-List
Sent: Wednesday, October 28, 2015 1:51 PM
To: nw-modeling-list at nwhs.org
Cc: NW Modeling List
Subject: Re: sound decoder ?

 

Use the TCS WOW 101 Steam KA2 decoder with a 28mm WOW sound speaker! Also
don't bother with installing a cam for the chuff! Use the auto chuff! It is
amazing! Once you get it set you can watch the decoder do it's magic! Auto
Chuff is amazing as it comes alive and wait till you start pulling a load of
cars up a hill and the engine starts to work and the chuffing get louder and
harder!  Then coast down hill and the chuffing stops and the snifters start
working let the air out of the cylinders! HAVE FUN!!!!!

Ray Russell Sr.

PS the KA2 part of the part number is for the keep alive addition to the
decoder that lets the decoder keep working when the engine runs over a dirty
section of track!

 

In a message dated 10/28/2015 11:56:38 A.M. Eastern Daylight Time,
nw-modeling-list at nwhs.org writes:

Ray: I will go with the TCS decoder because of the whistle selection.

Do you have an item #?

Stephen

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20151028/933cc51f/attachment.html>


More information about the NW-Modeling-List mailing list