ROUNDHOUSE TRACKS

NW Modeling List nw-modeling-list at nwhs.org
Thu Feb 12 14:58:02 EST 2015


Thank you gentlemen.  The soldering iron is warming up now.....I knew I had something to do this afternoon!

Ed Svitil

Norfolk & Western Railway

 

  

 
> Subject: Re: ROUNDHOUSE TRACKS
> Date: Tue, 10 Feb 2015 18:04:54 -0500
> To: nw-modeling-list at nwhs.org
> From: nw-modeling-list at nwhs.org
> 
> In addition to to the sound problem, adding whiskers, or some other kind of sliding connections, would add four addition contact points in the circuit to your locomotive. While fine in theory, these kinds of connections are very unreliable. They're fragile, get dirty, tarnished, bent out of adjustment, and hard to repair. I don't recommend it.
> 
> A daisy chained ground wire to half the rails, and single wires from the rest, to a rotary, multi-position selector switch is not that difficult to do, and it should work well for a long, long time. Unfortunately you still need wipers for the turntable bridge, unless you have some fancy bearings.
> 
> Dave A
> 
> On Feb 10, 2015, at 3:09 PM, NW Modeling List wrote:
> 
> ... your idea of whiskers, I do not think it would work as an advantage.  If you have any sound locomotives the sound will be off as soon as the turntable takes the power away...
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
> 
> Dave
> http://daveayers.com
> http://brassbackshop.com
> 
> 
> 
> 
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20150212/65292639/attachment-0001.html>


More information about the NW-Modeling-List mailing list