Tuscan color

Mon Jul 14 10:31:47 EDT 2014

Lee

Sorry to hear you had issues with SC out of a spray can. I personally haved used alot of SC from a spray can and have never warmed it. Rather than sanding the runs out, I would recommend stripping the paint and starting over. 91% Isopropyl Alcohol bath and some scrubbing with a tooth brush should do the trick.

The other thing I would do is use a hair dryer between coats. This will help the paint dry quicker and will give you a better idea on how close you are to a satisfactory color.

Regards
Russ

Sent from my Galaxy S®III

<div>-------- Original message --------</div><div>From: NW Modeling List <nw-modeling-list at nwhs.org> </div><div>Date:14/07/2014  10:20  (GMT-05:00) </div><div>To: NW Modeling List <nw-modeling-list at nwhs.org> </div><div>Subject: Re: Tuscan color </div><div>
</div>
Since I started all this...  I bought what turned out to be a spray can of
Scalecoat N&W Red from my hobby shop.  I stripped the cars and sprayed
white primer.  I think I made a huge rookie mistake warming the can of
paint in warm tap water.  Works for enamel but not necessarily lacquer.
(I'm assuming Scalecoat is lacquer)  My first reaction was "this is purple
paint".  I must have applied ten light coats.  The paint is really thin
and I have some runs which was discouraging.  I'll let them dry, sand and
try again.  In hindsight, I would have used a darker primer and not warmed
the paint.  I have been out of modelling a few years....

Lee Burns

From:   NW Modeling List <nw-modeling-list at nwhs.org>
To:     NW Modeling List <nw-modeling-list at nwhs.org>,
Date:   07/14/2014 06:52 AM
Subject:        Re: Tuscan color
Sent by:        "NW-Modeling-List" <nw-modeling-list-bounces at nwhs.org>

Amen!  Just pick a shade of red or blue that pleases you and enjoy!

Ed Painter - Narrows,VA living in Dahlonega,GA

On Jul 12, 2014, at 4:10 PM, NW Modeling List <nw-modeling-list at nwhs.org>
wrote:

The archives has informed me that we don't have color chips in the
archives.
Based on the discussion so far, even if we had them, it probably wouldn't
settle this argument.
I'm not sure anything would actually settle this argument.
I, for one, do appreciate the guys who did chime in with the "this works
for me" answer, that is really the best answer for the original inquirer.
And it does appear that over the years we've learned the impact of
lighting, time, distance, perception, weathering, and lighting.

Frank Bongiovanni

On Thu, Jul 3, 2014 at 7:25 PM, NW Modeling List <
nw-modeling-list at nwhs.org> wrote:
FWIW perhaps the model committee could provide a paint chip or drift card
to Tru-Color; I'm sure they would be glad to add N&W Tuscan to their line
of prototypically correct model paints.
Jim Brewer
Glenwood MD

From: "NW Modeling List" <nw-modeling-list at nwhs.org>
To: "NW Modeling List" <nw-modeling-list at nwhs.org>
Sent: Thursday, July 3, 2014 3:28:14 PM
Subject: RE: Tuscan color

Lee;

What both Frank and Ed are talking about occurs in most every society.
Having lived in Milwaukee, WI for several years, I watched an argument
between a pair of Milw. Rd. HS members about the correct color orange on
their passenger cars and other equipment. One member argued that the
second was wrong in that they were all painted the same color & shade of
orange. The second while partially agreed, he stated that they were not
all the same color orange, as he had seen them come out of the paint shops
is different shades of orange, with the paint being ordered at the same
time from the same paint mfgr., which at the time was being delivered in
55 gal drums. The first individual continued to tell the second he was
wrong but finally realized he had to quit arguing when the second told him
that he was one of a half dozen employees of the Milw. Road who painted
their equipment fleet for a living.....

That being said, the N&W Red from Scalecoat color works well, however it
has a bit of a metallic flake to it. There are several colors I have seen
work fairly well, including WC Maroon. Another color that has just come
onto the market is from TruColor paints, which is very similar in nature
to the old line of Accu-Paint. They are now offering part # TCP-276 - PRR
1948+ Passenger Car Tuscan.

I am sure that somewhere in the archives there is a Paint ID # for the
non-metallic red, that can be shared and closely matched with current
commercial paints from a PPG or ICI paint dealer. I would suggest
obtaining a small amount of said color and try to best match that color by
primering a piece of styrene and top coating the commercial grade paint,
and then doing the same with several colors of model rr paint and seeing
which works best for you and you lighting situation. Keep in mind that
some clear coats will slightly shift the tone of the color of the paint.
Also, the color primer will yield different finish colors as well. Tamyia
offers both a white and mild grey primer paint for example. Darker colors
tend to pop more on a lighter base color.

Hope this helps.

Regards,
Russ Goodwin
Buford, GA

Date: Wed, 2 Jul 2014 23:16:58 -0400
Subject: Re: Tuscan color
To: nw-modeling-list at nwhs.org
From: nw-modeling-list at nwhs.org

Lee; what Ed is referring to is a "color flame war" that happens every
time N&W Tuscan Red or Pevlar Blue shows up on this list.  FWIW, this also
happens on the C&O list with Enchantment Blue, the C&O list and the NYC
list with shades of gray, and probably just about every other model
railroad list.

Hopefully someone who does a lot of painting, and is pleased with the
result, will tell you what mix works for them, and will nicely mention
that with lighting, etc. (the etc. is half a clinic)you may have to make
adjustments.  With that I can't help; tuff enough for us Virginian
modelers to settle on workable yellows and black.  One thing I can tell
you, is that Dr. Jim EuDaly (he's an eye doc, so this isn't
fantasy)actually told us in a clinic (at a C&O meet)that color actually
varies a bit with scale, and (I hope I got this right)you probably need a
tad lighter mix than an HO modeler would.  I can also tell you that your
room lighting is probably one of the most important factors.  I guess
there's one other thing I should mention because the more experienced
painters consider it so obvious they don't mention it: make sure the light
where you paint is the same as the light on the layout.

Frank Bongiovanni

On Wed, Jul 2, 2014 at 5:48 PM, NW Modeling List <
nw-modeling-list at nwhs.org> wrote:
My favorite modeling list topic!

Ed Painter Narrows,VA living in Dahlonega,GA

On Jul 2, 2014, at 3:21 PM, NW Modeling List <nw-modeling-list at nwhs.org>
wrote:

I am new member to the modeling list.  I am painting an N scale passenger
car set and wondered what color you folks recommend to match the Tuscan
red.

Thank you,

Lee Burns

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_

This e-mail message, including attachments, may contain confidential,
proprietary, or export controlled information.
Any unauthorized disclosure, distribution, or other use is prohibited,
unless expressly authorized.
If you receive this e-mail in error, please notify the sender, and delete
all copies of the original message from your
systems.________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

________________________________________ NW-Modeling-List at nwhs.org To
change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list Browse the
NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20140714/3b4d72b2/attachment-0001.html>
-------------- next part --------------
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/