Need brass PFM N&W 'A' tender

[NW Modeling List]

Dave Ayers: i have a couple of NW brass tender that I would be willing to part with. Will check them tonight for vintage.
Contact me off line if you wish. Cal Reynolds wcalvin at triad.rr.com 
  ----- Original Message ----- 
  From: NW Modeling List 
  To: NW Modeling List 
  Sent: Monday, January 30, 2012 12:20 PM
  Subject: RE: Need brass PFM N&W 'A' tender


  All the "J" 22k gal tenders had smooth welded sides (no rivets) and only when placed into freight service at the end of their operation lives did  at least some of the J tenders receive doghouses.  All tenders from any of the imported brass J's including the J-1's have smooth welded sides.  None have doghouses.

   

  Precision Scale Models imported 22k gal tenders individually that would work with Y's or A's (later versions and not cheap).  I've seen these PSC tenders from time to time on eBay and likewise hit and miss with Brass dealers (it's been several years since they were imported).  Beautiful models.  You never know what may show-up on eBay but a tender from either a PFM A or Y would meet your needs.  Much less likely to show up would be tenders from Key, PSC, or Division Point A's or Y's.... but with eBay you never know.  Also simply doing various web searches for N&W HO Brass locomotives and/or 22,0000 gal tenders (try various wordings) will sometimes surprise you with what shows up.  Again, you never know...

   

  Look at the tender and locomotive drawings and pictures on N&WHS web site   http://www.nwhs.org/ -  http://www.nwhs.org/archivesdb/rollingstock.php?RRSelect=N%26W+Rwy&CatSelect=Tender .  There are many pictures and drawings of N&W tenders to assist in a continuing education on N&W tenders.   

   

  Ed Painter:  Narrows, VA currently living in Russellville, AR.

   

  From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List
  Sent: Monday, January 30, 2012 9:24 AM
  To: N&W Modeling List
  Subject: RE: Need brass PFM N&W 'A' tender

   

  Dave,
  If you need photos of this tender, I can take some images of my PFM. (it's unpainted too)
   
  Dave Willis
  (blt 1962, c/n 4)
   


------------------------------------------------------------------------------

  Subject: Need brass PFM N&W 'A' tender
  Date: Sat, 28 Jan 2012 13:29:57 -0500
  To: nw-modeling-list at nwhs.org
  From: nw-modeling-list at nwhs.org

  All, 

   

  I just got a PFM N&W 'A" 2-6-6-4 'basket case'. I can fix the bent and missing parts, but it came with a GEM C&O tender - not even close, so I need the correct tender for this model.

   

  Does anyone have one to sell, or know where I can find one ?

   

  There was a Gem 'J' tender on eBay, and I checked out how close it might be. Oddly it appears to to the right size and shape, but is missing the doghouse (not a problem), and rivets (big problem).

   

  Any comments on N&W tender commonality, or variations in 'A' tenders ?

   

  Thanks,

  Dave

  http;//daveayers.com

  http;//brassbackshop.com

   






   


  ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/



------------------------------------------------------------------------------


  ________________________________________
  NW-Modeling-List at nwhs.org
  To change your subscription go to
  http://list.nwhs.org/mailman/options/nw-modeling-list
  Browse the NW-Modeling-List archives at
  http://list.nwhs.org/pipermail/nw-modeling-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20120130/31e0ec33/attachment.html>