N at W Tuscan Red and Pevlar Blue

NW Modeling List nw-modeling-list at nwhs.org
Mon Mar 14 13:24:40 EDT 2011


If you'd sign your eMail, we'd know who doesn't know how to spell the name
of N&W's President after Saunders.

It wasn't PEVLAR.

It was Pevler.

I don't believe that was the official name of the paint color. A better
name is "post merger blue".

EdK

-----Original Message-----
From: NW Modeling List
Sent: Monday, March 14, 2011 12:04 PM
To: nw-modeling-list at nwhs.org
Subject: N at W Tuscan Red and Pevlar Blue


There has been some discussion of late about Tuscan Red and Pevlar Blue.
Of late I have painted models using suggestions that I gathered from this
sight. My first model was a GP-9 that I painted Pevlar Blue using NASON
brand paint code 76547 IE, GM National Fleet Color. NASON is a brand of
paint that is marketed by DuPont. Last week I painted another GP-9 Tuscan
Red and again using the NASON brand code 43498 IE, 1975 Chrysler Vintage
Red. Both of these colors are in Acrylic Enamel orange label fast dry and I
used NASON 441-21 reducer at 35%. If you decide to use these colors I did
not use the available hardner in my painting. I have used the hardner in
painting full size automobiles but did not feel that it was necessary in
this application. I had a half pint of both colors mixed at a cost of about
10.00 per and so it wasn't much more expensive that model paint.

In both cases both colors are just exactly as I remembered them back in
the day. In the case of the Tuscan Red this is the old red not the new one.
Both colors are very high gloss and the Tuscan Red has it's metallic base.
After applying decals and weathering I toned both models down by using a
very diluted 50% mixture Floquil flat finish , I wanted to retain some of
the gloss but not all of it. I'm a happy camper with the results on both
models.

This week I am going to paint a few more models using other paints. We all
know that both of these colors changed as soon as the spray guns were turned
off. I'm going to use the Floquil Enchantment Blue with 10 drops of Engine
Black for one and as Microscale Decals suggests Floquil Light Blue for
another. I've tested both of these paints and can also relate to both of
them being the proper Blue. The Light Blue sort of represents a sightly
faded version of the Blue. I'm in the process of trying out the suggestion
of 1 part Milwaukee Red and two parts SP Daylight Red for the Tuscan Red.

I live in Bellevue,Ohio and I'm modeling the transition period of the mid
to late 60's when The ready tracks had a verity of different fallen flags
ready to pull freight in any direction. If I were to model today's diesel
pit and ready track it would be the same as one can see 6 to 8 different
road names ready to pull North,East, South and West at any given time. The
Main yards are a half mile behind my house and as I look out over the grain
fields I may not have the Grand Canyon or the Purple Mountains but the
scenery in my back yard changes every hour. From the days of the Nickle
Plate to todays Norfolk Southern it has never been dull watching trains in
Bellevue,Ohio.
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/




More information about the NW-Modeling-List mailing list