HO Brass radius

[NW Modeling List]

Those may be harder to find that the M's. BTW, I have a couple of the E2a's in 
the as built configuration - might be willing to part with one.
Jim Nichols. Contact me off line at jamesanichols at bellsouth.net




________________________________
From: NW Modeling List <nw-modeling-list at nwhs.org>
To: NW Modeling List <nw-modeling-list at nwhs.org>
Sent: Fri, February 11, 2011 6:39:08 AM
Subject: Re: HO Brass radius

I suggest the NWSL "W" class 2-8-0.  They were used into the late 1940's
and were similar to the M's.  They had the same boiler, wheel diameter and I
think cylinders and early Baker valve gear.  Since I model the 1930's It was
almost a necessity to get one.  I have 2 M's and 7 Powerhouse Y3's, a Z1 and
a K3.


Mark Lindsey
Stuck in the 1930's


On 2/10/11 5:23 PM, "NW Modeling List" <nw-modeling-list at nwhs.org> wrote:


> So the Sunset M purchase fell through. The guy wasn't ready to part with it. I

> don't blame him, they are beautiful models.

> 

> I'm now looking around for more options for smaller steam. I'm trying to get

> something that can handle work on a branch line with 22" and some 18" radius

> curves.

> 

> I've looked at an E2a and S1. Anyone own these and can vouch for running

> ability on curves/in general?

> 

> I'm really interested in the NWSL E2a. Is it best to regear/remotor?

> 

> Thanks in advance,

> Brad

> 

> 

> ________________________________________

> NW-Modeling-List at nwhs.org

> To change your subscription go to

> http://list.nwhs.org/mailman/options/nw-modeling-list

> Browse the NW-Modeling-List archives at

> http://list.nwhs.org/pipermail/nw-modeling-list/


--


Mark Lindsey
ODIN Desktop Support
Cell-202-345-6402





________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20110211/9cf9feca/attachment.html>