THANKS AND MORE HELP

NW Modeling List nw-modeling-list at nwhs.org
Thu Aug 5 08:07:36 EDT 2010



Thanks guys! I had missed the MR article about the rail in dowel tool. I tried it yesterday and it works great! Finished the yard ladder with nary a hole in the thumb from the joiner (did grab the pointy end of the spike every now and then though - my guess is no fix for clumsiness!).

Ed Svitil





To: nw-modeling-list at nwhs.org
Subject: Re: THANKS AND MORE HELP
Date: Wed, 4 Aug 2010 15:45:42 -0400
From: nw-modeling-list at nwhs.org



You can turn it around and insert code 70 or 100, whichever meets your needs. I suggest a tight fit and a drop of glue as you insert the rail. Color code one or both ends for quick id. Cal Reynolds.

----- Original Message -----
From: NW Modeling List
To: NW Modeling List
Sent: Wednesday, August 04, 2010 11:54 AM
Subject: Re: THANKS AND MORE HELP

I saw a article in MR a few months back, Take a small piece of code 83 rail and file the one end to use as a wedge. Drill a hole in a small dowel rod and glue this into the rod. You can then then use it to start the rail joiners without cutting up your fingers. Besides try doing it in Nscale. Joe G

On 8/4/2010 10:48 AM, NW Modeling List wrote:
NW Modeling List wrote:



Many thanks to those who explained that N&W sand towers were a dark color, as in the photo.

Another frustration that I'm sure others have encountered - laying Shinohara flex track with code 83 rail joiners. Is there some trick to getting them one juuuuuust a bit easier? I spend an inordinate amount of time with small pliers and too often end up with the joiner stuck in my thumb about 3 inches!

I grabbed some old code 100 joiners and they went on REAL easy, but I'm worried that electical conductivity will suffer.

Howdy Ed

Use a small screwdriver to open the ends of the code 83 joiners. That will help. Also use a file on the ends of the rail - top and bottom of the base - to taper the area that slides into the joiner.

Take care
Bill


--
== Scale Model Railroad Products ==
== Manufacturer - Retailer - Importer ==

Ordered your Mill Creek Tipple No. 2 yet??? http://www.btsrr.com/bts7240.htm

Bill & Diane Wade

B.T.S.
RR 1 Box 141A
Belington, WV 26250

Phone: 304-823-3729
FAX: 304-823-2901
http://www.btsrr.com

We wish you Fair Winds and Following Seas.
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/



________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20100805/6c9f0fa2/attachment.html>


More information about the NW-Modeling-List mailing list