Challengers and coal

NW Modeling List nw-modeling-list at nwhs.org
Wed Feb 24 17:09:18 EST 2010


The proportions of 'burnable carbon' and inert material vary considerably depending on the source of the coal.
The UP needed a higher firing rate with their lower quality coal to attain performance.  In general; UP coal
would produce more ash; require more air; and increase build-up in the hot side of the boiler tubes and flues.
With better coal, the Clinchfield was able to maintain draft with a single stack.
 
Jerome Crosson.




-----Original Message-----
From: NW Modeling List <nw-modeling-list at nwhs.org>
To: NW Modeling List <nw-modeling-list at nwhs.org>
Sent: Wed, Feb 24, 2010 12:12 pm
Subject: Re: Challengers and coal




Not to sound stupid but what would be a "better" coal to use? Isn't the majority
of coal deposits in the US bituminous coal?

Thanks
Jon Kelley

Sent on the Sprint® Now Network from my BlackBerry®

-----Original Message-----
From: NW Modeling List <nw-modeling-list at nwhs.org>
Date: Wed, 24 Feb 2010 11:41:15
To: 'NW Modeling List'<nw-modeling-list at nwhs.org>
Subject: RE: Challengers and coal

Maybe related and maybe not, but the Clinchfield did change the way the UP
Challengers were drafted (i.e., single stack replacing double stack) Jim
Nichols

I would guess

> that better coal would make the Challenger steam easier.

> The implication is

> that it would increase the effective output. (as opposed to

> theoretical

> output) Jim

> Nichols

===============

Trying to keep this on the lite side, I believe the Challengers Clinchfield got
from D&RGW were of the same design as the last UP Challengers, so they must have
run on some decent coal on CRR. ;-)

Mark Peele
Catonsville, MD





________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20100224/18af2d98/attachment.html>


More information about the NW-Modeling-List mailing list