Atlas Alco RS 3

NW Modeling List nw-modeling-list at nwhs.org
Tue Feb 12 09:42:19 EST 2008


Ken: Cal Scale has excellent end and corner grabs for RS 3s. they have been
advertising in the train hobby mags recently, MR, RMC etc. I have used and
recommend them. Cal Reynolds.
----- Original Message -----
From: "NW Modeling List" <nw-modeling-list at nwhs.org>
To: "NW modeling list" <nw-modeling-list at nwhs.org>
Sent: Tuesday, February 12, 2008 3:14 AM
Subject: Atlas Alco RS 3



>

> Howdy,

>

> I recently purchased an Atlas Alco RS 3, in old N&W blue paint scheme. I

> need to find some replacement parts such as the pilot hand rails on the

> long hood or front end and also need to know if replacement gear units are

> still available. I know this isn't exactly the sort of modeling question

> normally placed on this list, but figured some N&W modelers may have this

> information, or may have experienced the same problem, especially if they

> model late steam and early diesel as I do. I have an extra RS 11 front

> hand rail, but it isn't quite the same as the type on the RS 3. After

> re-lubeing and cleaning the gears and wheel sets the engine runs smoothly,

> but the tall gear has a tendency to pop out of place under medium loads.

> So I suspect that the entire front drive assembly may soon need replacing.

> Since I bought it in used condition I don't even have the instruction

> sheet that normally comes with Atlas engines. I am even willing to buy an

> old parts model if someone has one. I ca

> n sure

> use some help on this one, since the rest of the engine is perfect.

>

> Thanks,

>

> Ken McWilliams

>

>

> ________________________________________

> NW-Modeling-List at nwhs.org

> To change your subscription go to

> http://list.nwhs.org/mailman/options/nw-modeling-list

> Browse the NW-Modeling-List archives at

> http://list.nwhs.org/pipermail/nw-modeling-list/

>




More information about the NW-Modeling-List mailing list