PCM Y6b's

nw-modeling-list at nwhs.org nw-modeling-list at nwhs.org
Tue May 23 10:12:15 EDT 2006


Bob contact Rick Bell in Augusta, Ga about installing decoders and
remotoring. He is at Rwbrv4 at aol.com, Cal Reynolds
----- Original Message -----
From: <nw-modeling-list at nwhs.org>
To: "N and W Modeling List" <nw-modeling-list at nwhs.org>
Sent: Monday, May 22, 2006 7:16 AM
Subject: Re: PCM Y6b's



> WEll I have FIVE Rivarossi Y6b's. Three are still as Y6b's, and two I have

> are kitbashed into a Y6 and a Y4. WIth a little bit of money invested in

> detail parts and DCC decoders I have five unique units. Now, I have had

> trouble getting the DCC decoders in them so am seeking help there, but I

> figure even remotored and with the investment I have in them, I have half

> the investment that one of the PCM units would be, or less.

>

> Bob Welsh

>

> ----- Original Message -----

> From: <nw-modeling-list at nwhs.org>

> To: "'N and W Modeling List'" <nw-modeling-list at nwhs.org>

> Sent: Sunday, May 21, 2006 10:08 PM

> Subject: RE: PCM Y6b's

>

>

>> Isn't PCM connected in some way to BLI? IF so what happened to the

>> communication between the two companies. Since I heard on the list a Y6b

>> was

>> going to be made I was really excited. Now hearing Mr. King's comments on

>> the Y6b, which I personally pay very close attention to all comments Mr.

>> King makes as well as a lot of others here on the list, I will resume a

>> search for a brass model and not purchase the PCM model at all. The model

>> railroad industry is BOOMING right now and for PCM to put out a

>> substandard

>> model for the price they are asking is ridiculous. I have a tight model

>> railroad budget and I would have been severely upset if I had purchased

>> this

>> model and my current Rivarossi Y6b be more representative of the awesome

>> class of locomotive then the PCM.

>>

>>

>> Just me 2 cents worth.

>> Jon Kelley

>> norfolknwestern1218 at adelphia.net

>>

>> -----Original Message-----

>> From: nw-modeling-list-bounces at nwhs.org

>> [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of

>> nw-modeling-list at nwhs.org

>> Sent: Sunday, May 21, 2006 11:57 AM

>> To: N and W Modeling List

>> Subject: Re: PCM Y6b's

>>

>> Nigel - attached is the letter to PCM that will go in tomorrow's mail.

>>

>> Ed King

>> ----- Original Message -----

>> From: <nw-modeling-list at nwhs.org>

>> To: "N and W Modeling List" <nw-modeling-list at nwhs.org>

>> Sent: Saturday, May 20, 2006 10:02 PM

>> Subject: Re: PCM Y6b's

>>

>>

>>> Hi Ed;

>>>

>>> Have you sent these comments to PCM?

>>>

>>> Thank you

>>> Nigel F Misso

>>>

>>> ----- Original Message -----

>>> From: <nw-modeling-list at nwhs.org>

>>> To: "N and W Modeling List" <nw-modeling-list at nwhs.org>

>>> Sent: Friday, May 19, 2006 5:25 PM

>>> Subject: Re: PCM Y6b's

>>>

>>>

>>>> So I got mine yesterday, and put it on the programming track today.

>>>>

>>>> Comments: Valve gear is not acceptable. If Proto can put acceptable

>>>> valve gear on the Y-3s, why can't these folks put it on the Y-6b? And

>>>> Broadway on the N&W A, for that matter?

>>>> Sound is barely acceptable; the exhaust sound is

>>>> confusing to say the least. Other sounds are OK; a nice touch is the

>>>> splash of water from the injector overflow after the injector shuts

>>>> off.

>>>> Programming is OK.

>>>> Power - not acceptable. My Broadway 1218 will

>>>> shove

>>>> the Y-6b right off the test track without slipping a driver (I haven't

>>>> tested it against my Y-3s). The Y-6b will not budge the A if the A is

>>>> not under power.

>>>> Tender is heavy all right, but I guess that's

>>>> because

>>

>>>> of the big speaker.

>>>>

>>>> Ed King

>>>>

>>>> ----- Original Message -----

>>>> From: <nw-modeling-list at nwhs.org>

>>>> To: "N and W Modeling List" <nw-modeling-list at nwhs.org>

>>>> Sent: Thursday, May 18, 2006 9:22 AM

>>>> Subject: Re: PCM Y6b's

>>>>

>>>>

>>>>> There, there, David. Everything's gonna be OK. Let not your heart be

>>>>> troubled . . .

>>>>>

>>>>> EdKing

>>>>> ----- Original Message -----

>>>>> From: <nw-modeling-list at nwhs.org>

>>>>> To: "N and W Modeling List" <nw-modeling-list at nwhs.org>

>>>>> Sent: Thursday, May 18, 2006 7:41 AM

>>>>> Subject: Re: PCM Y6b's

>>>>>

>>>>>

>>>>>> It's probably my imagination, but....

>>>>>>

>>>>>> Is there something proportionately off about the front

>>>>>> end of PCM's Y6b? All the individual parts are great,

>>>>>> but the front view on the website doesn't look right.

>>>>>> Is the headlight a bit too high? The Y6b bracket was

>>>>>> different from the other Y6's and the headlight was

>>>>>> located lower relative to the number plate. Gave the

>>>>>> Y6b a less squatty appearance from the front.

>>>>>>

>>>>>> Maybe I'm just having a rivet-counter relapse. Try to

>>>>>> keep it under control but don't always succeed.

>>>>>>

>>>>>> Dave Stephenson

>>>>>>

>>>>>>

>>>>>>

>>>>>> __________________________________________________

>>>>>> Do You Yahoo!?

>>>>>> Tired of spam? Yahoo! Mail has the best spam protection around

>>>>>> http://mail.yahoo.com

>>>>>> ________________________________________

>>>>>> NW-Modeling-List at nwhs.org

>>>>>> To change your subscription go to

>>>>>> http://list.nwhs.org/mailman/options/nw-modeling-list

>>>>>>

>>>>>

>>>>>

>>>>> ________________________________________

>>>>> NW-Modeling-List at nwhs.org

>>>>> To change your subscription go to

>>>>> http://list.nwhs.org/mailman/options/nw-modeling-list

>>>>>

>>>>

>>>>

>>>> ________________________________________

>>>> NW-Modeling-List at nwhs.org

>>>> To change your subscription go to

>>>> http://list.nwhs.org/mailman/options/nw-modeling-list

>>>

>>> ________________________________________

>>> NW-Modeling-List at nwhs.org

>>> To change your subscription go to

>>> http://list.nwhs.org/mailman/options/nw-modeling-list

>>>

>>

>> ________________________________________

>> NW-Modeling-List at nwhs.org

>> To change your subscription go to

>> http://list.nwhs.org/mailman/options/nw-modeling-list

>>

>>

>> --

>> No virus found in this incoming message.

>> Checked by AVG Free Edition.

>> Version: 7.1.392 / Virus Database: 268.6.1/344 - Release Date: 5/19/2006

>>

>

> ________________________________________

> NW-Modeling-List at nwhs.org

> To change your subscription go to

> http://list.nwhs.org/mailman/options/nw-modeling-list

>

>

>

> --

> No virus found in this incoming message.

> Checked by AVG Free Edition.

> Version: 7.1.392 / Virus Database: 268.7.0/345 - Release Date: 5/22/2006

>

>




--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.392 / Virus Database: 268.7.0/345 - Release Date: 5/22/2006



More information about the NW-Modeling-List mailing list