Working with old decals

[nw-modeling-list at nwhs.org]

MicroScale make a liquid decal film that can be brushed onto old decals, and 
will re-solidify them. Works well. Best bet is several thin coats with a 
fine hair brush.

Regards,
Russ Goodwin



>From: nw-modeling-list at nwhs.org

>Reply-To: N and W Modeling List <nw-modeling-list at nwhs.org>

>To: "N and W Modeling List" <nw-modeling-list at nwhs.org>

>Subject: Working with old decals

>Date: Sun, 12 Feb 2006 20:57:02 -0500

>

>A guy gave me a good tip for working with old, old decals that might 

>disintegrate when you try to apply them.

>

>Pin them down flat on a board and coat them lightly with Glosscote.  This 

>will keep them from coming apart when you work with them and will still let 

>them slip away from the backing paper.

>

>EdKing

>

>

>________________________________________

>NW-Modeling-List at nwhs.org

>To change your subscription go to

>http://list.nwhs.org/mailman/options/nw-modeling-list