DCC
    nw-modeling-list at nwhs.org 
    nw-modeling-list at nwhs.org
       
    Mon Jan 16 23:06:32 EST 2006
    
    
  
For programming ease, Digitrax is much easier.  I do however like the 
NCE system for single consist operation.  For cutting off a helper unit 
the Digitrax is easier.  Your choice of system is more dependant on who 
your local hobby shop carries.
Regards,
Kurt S. Kramke MMR
nw-modeling-list at nwhs.org wrote:
> Just a note about DCC:
>  
> Popularity of DCC Systems by sales that was published in MR?
> #1 -  Digitrax  [Largest of DCC owners]
> #2 -  NCE [not a close second, but one of 2 top major players]
> #3 -  Lens [sales I beleive were only 8%, with the owner up there in 
> years and some buyers wondering if support will be there if anything 
> happens to him. One man company with all the knowledge.]
>  
> Hope this helps,
> Stephen Rineair
>  
>
> >Date: Sun, 15 Jan 2006 10:05:56 -0500
> >
> >Returning to active modeling after a 15 year layoff (something to do 
> with
> >raising a family and earning a living) would like some thoughts on
> >reference material to try and understand what "DCC" is. Is there a good
> >book or other material available to try and understand systems, wiring,
> >hardware, capabilities, etc. I do a bit of my own wiring and actually 
> own
> >a soldering gun, but no reference can be too elemental at this point!
> >
> >Many thanks guys.
> >
> >Ed Svitil
> >
>
>
> >________________________________________
> >NW-Modeling-List at nwhs.org
> >To change your subscription go to
> >http://list.nwhs.org/mailman/options/nw-modeling-list
>
>
> ________________________________________
> NW-Modeling-List at nwhs.org <mailto:NW-Modeling-List at nwhs.org>
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
>
>------------------------------------------------------------------------
>
>________________________________________
>NW-Modeling-List at nwhs.org
>To change your subscription go to
>http://list.nwhs.org/mailman/options/nw-modeling-list
>  
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20060116/725f6059/attachment-0001.html
    
    
More information about the NW-Modeling-List
mailing list