Baker Valve Gear on J's.

[NW Mailing List]

Lois - 

I don’t think any development of Baker Valve Gear occurred in the sense that you’re thinking about.  The N&W got dissatisfied with Walschaerts gear early on with the E-1 Pacifics and M-1 4-8-0s, both of which (according to a long-time MP official who was a mentor of mine) that promoted rapid link block wear.  The M-2s were slightly better, as were the Z-1 2-6-6-2s.  You are referred to a treatise on valve gear in the ARROW entitled “Monkey Motion”.

There was a predecessor of the Baker Valve Gear known as the Baker-Pilliod gear; it was applied as an experiment to class A 4-6-0 #89.  It was used on the first E-2 Pacifics of 1910.  The Baker-Pilliod gear supposedly gave quicker valve events for any given cutoff but was quite complicated.  A simplified version of this gear, known simply as the Baker Valve Gear (Abner D. Baker invented the gear, it was marketed by the Pilliod Company of Ohio) came out about 1911 and N&W adopted it as standard.  The Baker Valve Gear was patented and had to be obtained from the Pilliod Company.  Some railroads didn’t think it was worthwhile.  N&W obviously thought it was worth the cost.

As far as development was concerned, the Baker gear offered the advantage of providing a longer valve travel without introducing excessive angularities into the valve gear.  After 1911 N&W never used another valve gear.  The A of 1936 used Baker gear with a long valve travel.  The only refinement thereafter was the application of McGill “Multirol” needle bearings for all the connections in the gear.  

When the J came along, I don’t think there was any question of using any other valve gear, or using poppet valves.  The Baker valve gear driving the J’s big valves helped the engine to attain speeds of over 110 MPH (read Dave Stephenson’s treatises in the ARROW about the 610 tests on the PRR).  Such speeds required driving wheel RPM in excess of 535, almost unheard of elsewhere.  (Charles Faris designed the counterbalancing for the J; his figures were checked by Voyce C. Glaze whose workbooks are at the N&WHS Archives; the J might have been the most perfectly counterbalanced steam locomotive ever built, anywhere, anytime).

I hope this is helpful.

Ed King   


From: NW Mailing List 
Sent: Monday, February 09, 2015 9:19 PM
To: nwhistorical society 
Subject: Baker Valve Gear on J's.


Friends:
I am starting the research for an article on Baker Valve Gear for the online newsletter, J Notes, which I write for my Facebook discussion group, the Friends of the 611. What I'd like to know is how N&W developed use of Baker valve gear through the years, concluding with the usage of this valve gear on the J's. I appreciate any and all assistance that is offered me regarding this subject.
Lois J.Ponton
N&W steam historian
ljpli at hotmail.com


Sent on a Sprint Samsung Galaxy S® III


--------------------------------------------------------------------------------
________________________________________
NW-Mailing-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-mailing-list
Browse the NW-Mailing-List archives at
http://list.nwhs.org/pipermail/nw-mailing-list/

---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-mailing-list/attachments/20150210/d1bab3be/attachment.html>