VGN PAs (WAS: Jawn Henry tender numbers)
NW Mailing List
nw-mailing-list at nwhs.org
Sun Jul 22 23:38:34 EDT 2012
I plan to start with the Mehano USRA light Pacific. The drivers are a little too
tall, but overal, the chassis is fairly correct. Boiler needs to be a little
fatter than the one on the light USRA, but somebody has suggested shortening the
boiler from a USRA light Mountain. I happen to have one (left over from a
conversion of the Bachmann light 4-8-2 to a streamlined K2a) so I will give that
a try. No easy tender, but I will start with the shell from a Bachmann N&W aux.
tender, and use the Andrews trucks from the Mehano tender (and maybe the floor).
Mehano is the manufacturer, and their Pacific has been offered at various times
by Model Power and IHC (maybe others). The later IHC ones have flywheels.
If you are paticular about the driver size, your best option is the Bowser NYC
Pacific, but the valve gear is wrong and the metal boiler will be harder to work
with. I prefer the styrene parts in the Mehano, and I can live with the slight
difference in driver size.
Jim Nichols
________________________________
From: NW Mailing List <nw-mailing-list at nwhs.org>
To: nw-mailing-list at nwhs.org
Sent: Sun, July 22, 2012 6:52:58 PM
Subject: Re: VGN PAs (WAS: Jawn Henry tender numbers)
Just curious; which production loco(s) would be a good basis for bashing into a
VGN PA?
Greg Harrod
In a message dated 7/22/2012 8:07:32 A.M. Eastern Daylight Time,
nw-mailing-list at nwhs.org writes:
Okay, Frank, you talked me into it. No promises on when, but it is going to
happen.
>
>Jim Nichols
>
>
>
>
________________________________
From: NW Mailing List <nw-mailing-list at nwhs.org>
>To: NW Mailing List <nw-mailing-list at nwhs.org>
>Sent: Sat, July 21, 2012 8:46:37 PM
>Subject: Re: VGN PAs (WAS: Jawn Henry tender numbers)
>
>
>No, they didn't. Best information we have is that the project was taken off the
>table about three or four years ago. Apparently part of the reason was that
>they didn't think there's be enough interest in a $1,700 Pacific.
>
>
>The good part of this is that those of you who held off bashing one can go
>ahead, and, if the result is good, you can share it with the rest of us and do
>an interesting article for the Arrow.(another subtle plug)
>
>Frank Bongiovanni
>
>
>On Sat, Jul 21, 2012 at 3:40 PM, NW Mailing List <nw-mailing-list at nwhs.org>
>wrote:
>
>Did Division Point ever produce the HO VGN PAs they talked about for a while?
>>
>>
>>pete groom
>>
>>.
>>
>>
>>>>
>>>>
>
>________________________________________
>NW-Mailing-List at nwhs.org
>To change your subscription go to
>http://list.nwhs.org/mailman/options/nw-mailing-list
>Browse the NW-Mailing-List archives at
>http://list.nwhs.org/pipermail/nw-mailing-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-mailing-list/attachments/20120722/1cf9b67b/attachment.htm>
More information about the NW-Mailing-List
mailing list