From nw-modeling-list at nwhs.org Mon Jan 20 09:38:12 2025 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Mon, 20 Jan 2025 09:38:12 -0500 Subject: N&WHSvideos Message-ID: Movie Night II has been posted to our YouTube channel: N&WHSvideos Jim Cochran -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Mon Jan 20 18:22:09 2025 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Mon, 20 Jan 2025 18:22:09 -0500 Subject: N&WHSvideos In-Reply-To: References: Message-ID: Thanks for the link Jim. For those that like a direct link, the N&WHS YouTube page is here: https://www.youtube.com/@NWHSvideos-t1r I have subscribed and clicked the bell icon (the first time I?ve done that, in spite of every YouTube content creator telling me to do it!). I?ll check out the most recent movie night, and the previous video. Matt > On Jan 20, 2025, at 9:38?AM, NW Modeling List wrote: > > Movie Night II has been posted to our YouTube channel: N&WHSvideos > Jim Cochran > ________________________________________ > NW-Modeling-List at nwhs.org > To change your subscription go to > http://list.nwhs.org/mailman/options/nw-modeling-list > Browse the NW-Modeling-List archives at > http://list.nwhs.org/pipermail/nw-modeling-list/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Mon Jan 20 17:41:54 2025 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Mon, 20 Jan 2025 22:41:54 +0000 (UTC) Subject: HO scale K1 sand dome In-Reply-To: References:

Message-ID: Just repeating what Tom had told me he used for his K-1 many years ago. Roger HuberDeer Creek Locomotive Works On Monday, January 20, 2025 at 08:46:23 AM CST, NW Modeling List wrote: USRA "Light" Mountain boiler would not be big enough for a K1. Jim Nichols On Sunday, January 19, 2025 at 12:23:20 PM CST, NW Modeling List wrote: "I've been hoping someone would make one in 3d printing." Roger,It seems to me that you are assuming that everyone would be using the same diameter boiler, which may not be the case. Jimmy Lisle Sent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: NW Modeling List via NW-Modeling-List Date: 1/19/25 11:03 AM (GMT-05:00) To: NW Modeling List Cc: NW Modeling List Subject: Re: HO scale K1 sand dome Unfortunately there is no sand dome like that. There are a couple squared off looking IC ones but they aren't big enough or have the correct shape/contours. I've been hoping someone would make one in 3d printing. The plans are out there and whatever they would require. I finally found a KEY K-1 and have thought about trying to make a mold of the dome and cast one in resin for my long awaiting 4-8-2. Roger HuberDeer Creek Locomotive Works On Sunday, January 19, 2025 at 07:27:51 AM CST, NW Modeling List wrote: For me I turned a Bowser USRA 4-8-2 into a K2. I used a powerhouse tender and upgraded to a Helix Humper motor and re-quartered using my rare Brazelton AutoQuarter. I swapped to multi part siderods and fabricated a pilot. ?George Hughes took my mid 1930?s era loco and passenger consist to the NWHS convention in I think 1991-2. ?Everything was lettered in the earlier Norfolk & Western. ?That engine could pull 20+ heavyweight Atherns.? Mark LindseyY3a at earthlink.net571-352-6358(cell) Sent from my iPhone On Jan 19, 2025, at 7:11 AM, NW Modeling List via NW-Modeling-List wrote: ?Yep,I?ve thought the same thing about that old Bowser sand?dome as I?ve eyed for years?kitbashing a Key K2a into a K1. It?would require some filing to better replicate the N&W sand dome, but it seems doable.?Of course, I haven?t figured out an easy solution for the ?sport model? welded cab either. Andre Jackson Sent from Yahoo Mail for iPad On Friday, January 17, 2025, 12:34 PM, NW Modeling List wrote: I may have found a Bowser part that might work:70252 - small sand dome Ill Central70253 - large sand dome Ill central I?ve been trying to find better photos.? Mark LindseyY3a at earthlink.net571-352-6358(cell) Sent from my iPhone On Jan 8, 2025, at 7:23 AM, NW Modeling List via NW-Modeling-List wrote: ?Does a source exist for an HO scale?K1?sand dome from?after the rebuild? ?Maybe I?ve missed it, but I?ve never seen one from the?brass casting companies. ?Has anyone ever tried, or seen, a?3d printed version? Dutch Thompson________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ -------------- next part -------------- An HTML attachment was scrubbed... URL: