HO scale K1 sand dome

[NW Modeling List]

"I've been hoping someone would make one in 3d printing."Roger,It seems to me that you are assuming that everyone would be using the same diameter boiler, which may not be the case.Jimmy LisleSent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org> Date: 1/19/25  11:03 AM  (GMT-05:00) To: NW Modeling List <nw-modeling-list at nwhs.org> Cc: NW Modeling List <nw-modeling-list at nwhs.org> Subject: Re: HO scale K1 sand dome Unfortunately there is no sand dome like that. There are a couple squared off looking IC ones but they aren't big enough or have the correct shape/contours. I've been hoping someone would make one in 3d printing. The plans are out there and whatever they would require. I finally found a KEY K-1 and have thought about trying to make a mold of the dome and cast one in resin for my long awaiting 4-8-2.Roger HuberDeer Creek Locomotive Works
        
        
        
            
                
                
                        On Sunday, January 19, 2025 at 07:27:51 AM CST, NW Modeling List <nw-modeling-list at nwhs.org> wrote:
                    
                    
                    
                
                
                For me I turned a Bowser USRA 4-8-2 into a K2. I used a powerhouse tender and upgraded to a Helix Humper motor and re-quartered using my rare Brazelton AutoQuarter. I swapped to multi part siderods and fabricated a pilot.  George Hughes took my mid 1930’s era loco and passenger consist to the NWHS convention in I think 1991-2.  Everything was lettered in the earlier Norfolk & Western.  That engine could pull 20+ heavyweight Atherns. Mark LindseyY3a at earthlink.net571-352-6358(cell)Sent from my iPhoneOn Jan 19, 2025, at 7:11 AM, NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org> wrote:
Yep,I’ve thought the same thing about that old Bowser sand dome as I’ve eyed for years kitbashing a Key K2a into a K1. It would require some filing to better replicate the N&W sand dome, but it seems doable. Of course, I haven’t figured out an easy solution for the “sport model” welded cab either.Andre JacksonSent from Yahoo Mail for iPadOn Friday, January 17, 2025, 12:34 PM, NW Modeling List <nw-modeling-list at nwhs.org> wrote:I may have found a Bowser part that might work:70252 - small sand dome Ill Central70253 - large sand dome Ill centralI’ve been trying to find better photos. Mark LindseyY3a at earthlink.net571-352-6358(cell)Sent from my iPhoneOn Jan 8, 2025, at 7:23 AM, NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org> wrote:
Does a source exist for an HO scale K1 sand dome from after the rebuild?  Maybe I’ve missed it, but I’ve never seen one from the brass casting companies.  Has anyone ever tried, or seen, a 3d printed version?Dutch Thompson
________________________________________NW-Modeling-List at nwhs.orgTo change your subscription go tohttp://list.nwhs.org/mailman/options/nw-modeling-listBrowse the NW-Modeling-List archives athttp://list.nwhs.org/pipermail/nw-modeling-list/________________________________________NW-Modeling-List@nwhs.orgTo change your subscription go tohttp://list.nwhs.org/mailman/options/nw-modeling-listBrowse the NW-Modeling-List archives athttp://list.nwhs.org/pipermail/nw-modeling-list/
________________________________________NW-Modeling-List at nwhs.orgTo change your subscription go tohttp://list.nwhs.org/mailman/options/nw-modeling-listBrowse the NW-Modeling-List archives athttp://list.nwhs.org/pipermail/nw-modeling-list/________________________________________NW-Modeling-List@nwhs.orgTo change your subscription go tohttp://list.nwhs.org/mailman/options/nw-modeling-listBrowse the NW-Modeling-List archives athttp://list.nwhs.org/pipermail/nw-modeling-list/
            
        
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20250119/f8819d3a/attachment-0001.htm>