HO scale K1 sand dome

[NW Modeling List]

It's part of the whole pilot. I have one of those. I'm not sure if they do
separate tanks.

I actually requested a few road pilots from them, because of the great
shelf collapse of 24 that broke more brass then I care to think about. My
poor Zs and Ms.

David Baker

On Sat, Jan 18, 2025, 12:44 PM NW Modeling List <nw-modeling-list at nwhs.org>
wrote:

> I think he is looking for the squarish sand dome not the steam dome.
> Haven’t found an air tank for the front yet. I looked through the Precision
> Scale catalog #3 and didnt find one. Might have to fabricate one from
> plastic or brass tubing.
>
> Mark Lindsey
> Y3a at earthlink.net
> 571-352-6358(cell)
>
>
> Sent from my iPhone
>
> On Jan 18, 2025, at 10:12 AM, NW Modeling List via NW-Modeling-List <
> nw-modeling-list at nwhs.org> wrote:
>
> 
> Back around 1963 MODEL RAILROADER magazine published drawings for the N&W
> K1. I would think in this day and age someone could use those drawings to
> make a 3D print of that sand box. Maybe the NWHS has drawings for it in
> their archives. Years ago, I was able to get drawings and have correct sand
> boxes made for the Rivarossi VGN Class AG.
>
> Jim Kehn
>
> On Saturday, January 18, 2025 at 06:27:53 AM EST, NW Modeling List <
> nw-modeling-list at nwhs.org> wrote:
>
>
> Are you looking for the small dome that I is on the upper side of the
> boiler?  If so Precision Scale makes the dome.
> Larry Brown
>
> On Fri, Jan 17, 2025, 12:34 PM NW Modeling List <nw-modeling-list at nwhs.org>
> wrote:
>
> I may have found a Bowser part that might work:
> 70252 - small sand dome Ill Central
> 70253 - large sand dome Ill central
>
> I’ve been trying to find better photos.
>
> Mark Lindsey
> Y3a at earthlink.net
> 571-352-6358(cell)
>
>
> Sent from my iPhone
>
> On Jan 8, 2025, at 7:23 AM, NW Modeling List via NW-Modeling-List <
> nw-modeling-list at nwhs.org> wrote:
>
>  Does a source exist for an HO scale K1 sand dome from after the
> rebuild?  Maybe I’ve missed it, but I’ve never seen one from the brass
> casting companies.  Has anyone ever tried, or seen, a 3d printed version?
>
> Dutch Thompson
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
>
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
>
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
>
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20250118/28064f26/attachment.htm>