N&W RPOs M1

Sun Aug 4 16:02:54 EDT 2024

 Sign me up for one. I'll be running trains 1/2 in the Shenandoah Valley, so there is certainly a possibility that the mail could have been in an M1 at times. Thanks for this!
Jeff Cornelius
    On Sunday, August 4, 2024 at 06:13:16 AM CDT, NW Modeling List <nw-modeling-list at nwhs.org> wrote:   

Mike: 

I’d also be interested in at least one for myself.  Thanks, 

George Weber 

From: NW-Modeling-List <nw-modeling-list-bounces at nwhs.org> On Behalf Of NW Modeling List via NW-Modeling-List
Sent: Saturday, August 3, 2024 8:32 PM
To: 'NW Modeling List' <nw-modeling-list at nwhs.org>
Cc: NW Modeling List <nw-modeling-list at nwhs.org>
Subject: RE: N&W RPOs M1

I’d be interested in one for myself. Phil Miller From: NW-Modeling-List On Behalf Of NW Modeling List via NW-Modeling-List Sent: Saturday, August 3, 2024 3:05 PM To: NW Modeling List Cc: NW Modeling 

sophospsmartbannerend  

I’d be interested in one for myself. 

Phil Miller 

From: NW-Modeling-List <nw-modeling-list-bounces at nwhs.org> On Behalf Of NW Modeling List via NW-Modeling-List
Sent: Saturday, August 3, 2024 3:05 PM
To: NW Modeling List <nw-modeling-list at nwhs.org>
Cc: NW Modeling List <nw-modeling-list at nwhs.org>
Subject: Re: N&W RPOs M1

Mike, We talked about these before. I'll still take 3 when/if you get them going. 

Roger Huber 

Deer Creek Locomotive Works 

On Saturday, August 3, 2024 at 01:57:11 PM CDT, NW Modeling List <nw-modeling-list at nwhs.org> wrote: 

That is amazing, if you ever make that I'm in.  

David Baker 

On Fri, Aug 2, 2024, 8:45 PM NW Modeling List <nw-modeling-list at nwhsorg> wrote: 

A few of you know, this is on my short list to 3d model and print. I did complete the car side last year, and decided I would prefer to make a complete car rather than attach a car side to an inaccurate donor core. I sort of stopped because I wasn't sure how to model the complex curves of the roof ends, but that has been resolved. If you can be patient, maybe I can knock it out after I finish my major caboose project. (painting and detailing a bunch of brass CF/CH/C3 cabins) 

I did a couple test prints, but didn't support it well enough which led to the close corner warping that you see below.  

However, you can see that it prints very well overall, and with better supports this would be a non-issue. 

 Mike Rector 

On Fri, Aug 2, 2024 at 11:27 AM NW Modeling List <nw-modeling-list at nwhs.org> wrote: 

Hi,  

Thanks, I'll poke around for M70 kits. Don't get me wrong, I'd love a real model but a stand-in must do for some equipment you can't really buy as it's too rare. Lol if anyone wants to get rid of one ... I've got some K1s and K2s that would be happy to pull them. 

I've leaned enough through the society to try and get a better balance of mail/storage vs. express. 

:) 

David Baker 

On Fri, Aug 2, 2024, 8:07 AM NW Modeling List <nw-modeling-list at nwhs.org> wrote: 

David, 

If a stand-in will do, you might watch E-bay for a Walthers 7831.  It was an M1, but the lapse of 60 or so years has rendered it "crude" by today's standards. 

Jim Cochran 

On Fri, Aug 2, 2024 at 7:22 AM NW Modeling List <nw-modeling-list at nwhs.org> wrote: 

Hi,  

Thanks for the info. Only done in brass probably means it would take ten years to even find one, hmmm it looks a bit like the PRR M70. Perhaps I'll use that as a a stand in. 

Thanks!  

David Baker 

On Fri, Aug 2, 2024, 7:09 AM NW Modeling List <nw-modeling-list at nwhs.org> wrote: 

The M1 has been dine in brass. 

Jim Nichols 

On Thursday, August 1, 2024 at 09:32:12 PM EDT, NW Modeling List <nw-modeling-list at nwhs.org> wrote: 

Hi Society, 

Were there any N&W RPOs done in HO? Specifically the M1 or something that was not a combination RPO? 

Thanks for sharing the knowledge, 

David Baker 

________________________________________ 

NW-Modeling-List at nwhs.org 

To change your subscription go to 

http://list.nwhs.org/mailman/options/nw-modeling-list 

Browse the NW-Modeling-List archives at 

http://list.nwhs.org/pipermail/nw-modeling-list/ 

________________________________________
NW-Modeling-List at nwhs.org
 To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
 Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/ 

________________________________________
NW-Modeling-List at nwhs.org
 To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
 Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/ 

________________________________________
NW-Modeling-List at nwhs.org
 To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
 Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/ 

________________________________________
NW-Modeling-List at nwhs.org
 To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
 Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/ 

________________________________________
NW-Modeling-List at nwhs.org
 To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
 Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/ 

________________________________________
NW-Modeling-List at nwhs.org
 To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
 Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/ 
     ________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20240804/ee90813b/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 517920 bytes
Desc: not available
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20240804/ee90813b/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 2341072 bytes
Desc: not available
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20240804/ee90813b/attachment-0003.png>