brass

[NW Modeling List]

For big parts, I like to use an airbrush sized sand blaster with 220 grit
media. It doesn't ruin the detail, and gives the paint something to stick
to. For little parts, like trucks, I use lacquer thinner. You can do the
big parts by soaking them in lacquer thinner if you don't have a little
sand blaster

On Fri, Nov 10, 2023, 5:38 AM NW Modeling List <nw-modeling-list at nwhs.org>
wrote:

> What is the best way to remove protective coating from brass in
> preparation for painting?
> Thanks,
> Jim Cochran
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20231110/cb0dbf1a/attachment.htm>