HO scale K2 was HO Scale decals (NW Modeling List)

NW Modeling List nw-modeling-list at nwhs.org
Sun Sep 27 19:53:35 EDT 2020


I used to have one of the brass K2a's. I didn't think that it was done very well. Especially the skyline casing.Jimmy LisleSent from my Verizon, Samsung Galaxy smartphone
There is a brass K2 out there in small numbers. The quantity of shells for which there would be a market in plastic is in the dozens, too few for the big manufacturer but just right for 3D printers who produce to the demand. Browser produced mountain drive kits and there are still many good IHC mountains out there.
Jeff Cornelius  
On Tuesday, September 22, 2020 NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org> wrote:Slim and none. And that is optimistic!
You can, however, get a K2 in O scale.




Jim Kehn



-----Original Message-----
From: NW Modeling List <nw-modeling-list at nwhs.org>
To: NW Modeling List <nw-modeling-list at nwhs.org>
Sent: Tue, Sep 22, 2020 7:17 pm
Subject: Re: HO scale decals (NW Modeling List)



This is just a question for th group what do y’all think the odds would be that we could get a plastic or die cast model of the N&W K2 K2A Streamlined locomotives in ho scale? Thanks for your thoughts and hope everyone is doing well.



Sincerely,

Jeff Mueller



On Sep 22, 2020, at 5:03 PM, NW Modeling List <nw-modeling-list at nwhs.org> wrote:




  
    
  
  
    
I like your idea and would use the decals you propose.

    
Walter Davis, Youngsville, NC

    

    
On 9/22/2020 11:24 AM, NW Modeling List
      wrote:

    

    
      
      One other factor to consider when the time comes to put together
      the decal sheet.  Do you include extra builders plates and class
      badges for known factory painted models that are lacking them,
      like the Broadway A's and J's?  Bare in mind I am not expecting an
      answer on this, just trying to generate discussion as Shellscale
      and the Society decide what needs to be included in the set, and
      how many of each.  But I do think there will be a market not just
      for people painting models for the first time, but also people who
      have either factory or custom painted models that they would want
      to go back and add these details to.  If I have to buy 6 sets to
      apply builders plates to 8 engines, I will, but if I could do the
      same number of engines and only buy 2 sets, that would be great. 
      It all depends on how many decals you have to arrange on the
      sheet, or sheets (A lot of Shellscale sets have used 2 sheets).
      


      

      
Also, one revision I like on the most recent Microscale sheet
        is they supplied black backgrounds for the builders plates,
        which makes a big difference if applying them to an engine with
        a smoke box that lacks the boiler jacketing.  

        

        Marty Flick

        
-----------------------------------------

        From: "NW Modeling List via NW-Modeling-List" 

          To: "NW Modeling List"

          Cc: "NW Modeling List"

          Sent: Monday September 21 2020 11:23:09PM

          Subject: Re: HO scale decals (NW Modeling List)

          

          

            

              
While excursion era 611
                decals have no interest for me I think Marty has the
                right idea. If going for the ultimate steam set then
                that should also be a part of it.

              


              

              
Roger Huber
                
Deer Creek Locomotive Works

              

            

            


            

            


            

          

          

            

              
 On Monday, September 21, 2020, 03:46:10 PM CDT, NW
                Modeling List <nw-modeling-list at nwhs.org> wrote: 

              


              

              


              

              

                

                  
Not to open up a can of worms, because I know
                    some people are sensitive about this, but any
                    possibility of throwing in a couple of excursion era
                    graphics for 611 on the decal sheet?  For example,
                    decals for the Robert Claytor plaque and the "I am
                    the thoroughbred of steam..." sticker?
                    


                    

                    
I'd buy the set either way, but if we are going
                      for the ultimate N&W steam decal set, why not
                      include as much as possible?

                    


                    

                    
Marty Flick

                      

                      
-----------------------------------------

                      From: "NW Modeling List" 

                      To: "NW Modeling List"

                      Cc: 

                      Sent: Sunday September 20 2020 6:45:42PM

                      Subject: Re: HO scale decals (NW Modeling List)

                      

                      Richard and I have already been discussing this
                      and it will be correct. Believe me.

                      

                      Besides builders and class plates, I am thinking
                      headlight number boards, number plates, all sizes
                      and designs of steam, cabside lettering,
                      appropriate tender tank lettering, etc. etc.

                      

                      Ken Miller

                      

                      > On Sep 20, 2020, at 1:39 PM, NW Modeling List
                      <nw-modeling-list at nwhs.org> wrote:

                      > 

                      > All

                      > 

                      > I would love to see some N&W Steam Decals
                      produced with research and techniques up to 2020
                      standards. The B&O folks just got a set in the
                      last year with the correct lettering style.
                      Archive research throughout the hobby has brought
                      these fine details to the fore. Let's include a
                      detailed usage guide so you don't have to guess
                      about which lettering size goes where.

                      > 

                      > But please let's not forget about some of the
                      smaller size locos like G, M and W and maybe we
                      can get some of those older brass models out of
                      closets and from underneath layouts and taking
                      places of honor on top of the layout. No. 6 has
                      gathered a lot of dust waiting.

                      > 

                      > Stoney

                      > Rick C. Stone

                      > NWHS #0001

                      > 

                      > 

                      >> On September 20, 2020 at 12:42 PM
                      nw-modeling-list-request at nwhs.org wrote:

                      >> 

                      >> 

                      >> Send NW-Modeling-List mailing list
                      submissions to

                      >> nw-modeling-list at nwhs.org

                      >> 

                      >> To subscribe or unsubscribe via the World
                      Wide Web, visit

                      >> https://pairlist6.pair.net/mailman/listinfo/nw-modeling-list<
                      a=""> />
                      >> or, via email, send a message with
                      subject or body 'help' to

                      >> nw-modeling-list-request at nwhs.org

                      >> 

                      >> You can reach the person managing the
                      list at

                      >> nw-modeling-list-owner at nwhs.org

                      >> 

                      >> When replying, please edit your Subject
                      line so it is more specific

                      >> than "Re: Contents of NW-Modeling-List
                      digest..."

                      >> 

                      >> 

                      >> Today's Topics:

                      >> 

                      >> 1. HO scale decals (NW Modeling List)

                      >> 2. Re: HO N&W Steam Decals (NW
                      Modeling List)

                      >> 3. Re: HO scale decals (NW Modeling List)

                      >> 4. Re: HO N&W Steam Decals (NW
                      Modeling List)

                      >> 5. Re: HO N&W Steam Decals (NW
                      Modeling List)

                      >> 6. Re: HO scale decals (NW Modeling List)

                      >> 7. Re: HO N&W Steam Decals (NW
                      Modeling List)

                      >> 

                      >> 

                      >>
                      ----------------------------------------------------------------------

                      >> 

                      >> Message: 1

                      >> Date: Sun, 20 Sep 2020 07:21:04 +0000
                      (UTC)

                      >> From: NW Modeling List
                      <nw-modeling-list at nwhs.org>

                      >> To: NW model list
                      <nw-modeling-list at nwhs.org>

                      >> Subject: HO scale decals

                      >> Message-ID:
                      <mailman.1082.1600597750.10487.nw-modeling-list at nwhs.org>

                      >> Content-Type: text/plain; charset="utf-8"

                      >> 

                      >> It would be nice to have these decals in
                      n-scale.

                      >> Jeff Wood

                      >> -------------- next part --------------

                      >> An HTML attachment was scrubbed...

                      >> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/2dc67517/attachment-0001.html><
                      a=""> />
                      >> 

                      >> ------------------------------

                      >> 

                      >> Message: 2

                      >> Date: Sun, 20 Sep 2020 10:41:56 -0400

                      >> From: NW Modeling List
                      <nw-modeling-list at nwhs.org>

                      >> To: NW Modeling List
                      <nw-modeling-list at nwhs.org>

                      >> Subject: Re: HO N&W Steam Decals

                      >> Message-ID:
                      <mailman.1090.1600616133.10487.nw-modeling-list at nwhs.org>

                      >> Content-Type: text/plain; charset="utf-8"

                      >> 

                      >> Marty,

                      >> 

                      >> I checked the ShellSclae, K4, and Tichy
                      offerings but there is nothing

                      >> really on point; Tichy offers the stripe
                      set for the J, and has a generic

                      >> set of builders plates. Otherwise zilch.
                      Perhaps the NWHS Modeling

                      >> committee could address this issue.

                      >> 

                      >> Jim Brewer

                      >> 

                      >> On Sat, Sep 19, 2020 at 8:48 PM NW
                      Modeling List <nw-modeling-list at nwhs.org>

                      >> wrote:

                      >> 

                      >>> Other than Microscale, are there any
                      choices for HO scale N&W steam

                      >>> locomotive decals that include the
                      builders plates and class badges? I

                      >>> ordered Microscale's latest revision,
                      and while it does finally put the

                      >>> builders plates and class badges in
                      more of a bronze or brass color instead

                      >>> of dulux gold like the lettering, it
                      still has a poor selection of classes

                      >>> repesented on the plates and badges.
                      There are no A's, and no Y's other

                      >>> than Y6b. Their O scale revision
                      includes these additional classes, so it

                      >>> is frustrating that the HO version
                      still does not. I've looked around but

                      >>> can't find any currently in
                      production other than Microscale. I know the

                      >>> Champ sets don't have the plates and
                      badges I am looking for. Are there

                      >>> any options besides finding an
                      appropriately sized "A" in another set and

                      >>> combining it with the Microscale?

                      >>> 

                      >>> Marty Flick

                      >>> 

                      >>>
                      ________________________________________

                      >>> NW-Modeling-List at nwhs.org

                      >>> To change your subscription go to

                      >>> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
                      a=""> />
                      >>> Browse the NW-Modeling-List archives
                      at

                      >>> <>http://list.nwhs.org/pipermail/nw-modeling-list/<
                      a=""> />
                      >>> 

                      >> -------------- next part --------------

                      >> An HTML attachment was scrubbed...

                      >> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/06d52421/attachment-0001.html><
                      a=""> />
                      >> 

                      >> ------------------------------

                      >> 

                      >> Message: 3

                      >> Date: Sun, 20 Sep 2020 09:38:46 -0400

                      >> From: NW Modeling List
                      <nw-modeling-list at nwhs.org>

                      >> To: NW Modeling List
                      <nw-modeling-list at nwhs.org>

                      >> Subject: Re: HO scale decals

                      >> Message-ID:
                      <mailman.1091.1600616142.10487.nw-modeling-list at nwhs.org>

                      >> Content-Type: text/plain;
                      charset="utf-8"; Format="flowed"

                      >> 

                      >> I agree, But I doubt if it will be done,
                      We seem to be in the minority

                      >> 

                      >> Joe Grzelak

                      >> 

                      >> On 9/20/2020 3:21 AM, NW Modeling List
                      wrote:

                      >>> It would be nice to have these decals
                      in n-scale.

                      >>> 

                      >>> Jeff Wood

                      >>> 

                      >>>
                      ________________________________________

                      >>> NW-Modeling-List at nwhs.org

                      >>> To change your subscription go to

                      >>> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
                      a=""> />
                      >>> Browse the NW-Modeling-List archives
                      at

                      >>> <>http://list.nwhs.org/pipermail/nw-modeling-list/<
                      a=""> />
                      >> -------------- next part --------------

                      >> An HTML attachment was scrubbed...

                      >> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/52d24f64/attachment-0001.html><
                      a=""> />
                      >> 

                      >> ------------------------------

                      >> 

                      >> Message: 4

                      >> Date: Sun, 20 Sep 2020 11:42:22 -0400

                      >> From: NW Modeling List
                      <nw-modeling-list at nwhs.org>

                      >> To: NW Modeling List
                      <nw-modeling-list at nwhs.org>

                      >> Subject: Re: HO N&W Steam Decals

                      >> Message-ID:
                      <mailman.1094.1600617989.10487.nw-modeling-list at nwhs.org>

                      >> Content-Type: text/plain; charset=utf-8

                      >> 

                      >> Marty

                      >> 

                      >> The Society can do the N&W steam
                      decals, the Microscale set is a bit undersized for
                      the 10 inch letters. However, we have to order a
                      fairly high number of sets to keep the pricing
                      reasonable, and therefore demand must be there for
                      the investment of time.

                      >> 

                      >> They can be done with correct builder?s
                      plates and class plates (Class J plates were
                      chromed, I believe the streamlined K2 plates were
                      also chromed) and bronze for most of the others,
                      the Y3s were cast iron I know for sure, class
                      plates bronze.

                      >> 

                      >> We could also include the correct early
                      small cab size lettering, and the aluminum color
                      lettering for passenger power.

                      >> 

                      >> It all depends on demand.

                      >> 

                      >> Best

                      >> Ken Miller

                      >> 

                      >>> On Sep 20, 2020, at 10:41 AM, NW
                      Modeling List <nw-modeling-list at nwhs.org>
                      wrote:

                      >>> 

                      >>> Marty,

                      >>> 

                      >>> I checked the ShellSclae, K4, and
                      Tichy offerings but there is nothing really on
                      point; Tichy offers the stripe set for the J, and
                      has a generic set of builders plates. Otherwise
                      zilch. Perhaps the NWHS Modeling committee could
                      address this issue.

                      >>> 

                      >>> Jim Brewer

                      >>> 

                      >>> On Sat, Sep 19, 2020 at 8:48 PM NW
                      Modeling List <nw-modeling-list at nwhs.org>
                      wrote:

                      >>> Other than Microscale, are there any
                      choices for HO scale N&W steam locomotive
                      decals that include the builders plates and class
                      badges? I ordered Microscale's latest revision,
                      and while it does finally put the builders plates
                      and class badges in more of a bronze or brass
                      color instead of dulux gold like the lettering, it
                      still has a poor selection of classes repesented
                      on the plates and badges. There are no A's, and no
                      Y's other than Y6b. Their O scale revision
                      includes these additional classes, so it is
                      frustrating that the HO version still does not.
                      I've looked around but can't find any currently in
                      production other than Microscale. I know the Champ
                      sets don't have the plates and badges I am looking
                      for. Are there any options besides finding an
                      appropriately sized "A" in another set and
                      combining it with the Microscale?

                      >>> 

                      >>> Marty Flick

                      >>> 

                      >>>
                      ________________________________________

                      >>> NW-Modeling-List at nwhs.org

                      >>> To change your subscription go to

                      >>> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
                      a=""> />
                      >>> Browse the NW-Modeling-List archives
                      at

                      >>> <>http://list.nwhs.org/pipermail/nw-modeling-list/<
                      a=""> />
                      >>>
                      ________________________________________

                      >>> NW-Modeling-List at nwhs.org

                      >>> To change your subscription go to

                      >>> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
                      a=""> />
                      >>> Browse the NW-Modeling-List archives
                      at

                      >>> <>http://list.nwhs.org/pipermail/nw-modeling-list/<
                      a=""> />
                      >> 

                      >> 

                      >> 

                      >> ------------------------------

                      >> 

                      >> Message: 5

                      >> Date: Sun, 20 Sep 2020 16:30:38 +0000

                      >> From: NW Modeling List
                      <nw-modeling-list at nwhs.org>

                      >> To: "'NW Modeling List'"
                      <nw-modeling-list at nwhs.org>

                      >> Subject: Re: HO N&W Steam Decals

                      >> Message-ID:
                      <mailman.1095.1600619825.10487.nw-modeling-list at nwhs.org>

                      >> Content-Type: text/plain; charset="utf-8"

                      >> 

                      >> Two questions then:

                      >> How do we show our interest for the
                      Society to gauge demand?

                      >> Rather than the Society invest in the
                      production, could you first

                      >> engage with MicroScale to offer a further
                      update of their decal?

                      >> Marty Flick

                      >> 

                      >>
                      -----------------------------------------From: "NW
                      Modeling List" 

                      >> To: "NW Modeling List"

                      >> Cc: 

                      >> Sent: Sunday September 20 2020 12:23:08PM

                      >> Subject: Re: HO N&W Steam Decals

                      >> 

                      >> Marty

                      >> 

                      >> The Society can do the N&W steam
                      decals, the Microscale set is a bit

                      >> undersized for the 10 inch letters.
                      However, we have to order a fairly

                      >> high number of sets to keep the pricing
                      reasonable, and therefore

                      >> demand must be there for the investment
                      of time.

                      >> 

                      >> They can be done with correct builder?s
                      plates and class plates

                      >> (Class J plates were chromed, I believe
                      the streamlined K2 plates were

                      >> also chromed) and bronze for most of the
                      others, the Y3s were cast

                      >> iron I know for sure, class plates
                      bronze.

                      >> 

                      >> We could also include the correct early
                      small cab size lettering, and

                      >> the aluminum color lettering for
                      passenger power.

                      >> 

                      >> It all depends on demand.

                      >> 

                      >> Best

                      >> Ken Miller

                      >> 

                      >>> On Sep 20, 2020, at 10:41 AM, NW
                      Modeling List wrote:

                      >>> 

                      >>> Marty,

                      >>> 

                      >>> I checked the ShellSclae, K4, and
                      Tichy offerings but there is

                      >> nothing really on point; Tichy offers the
                      stripe set for the J, and

                      >> has a generic set of builders plates.
                      Otherwise zilch. Perhaps the

                      >> NWHS Modeling committee could address
                      this issue.

                      >>> 

                      >>> Jim Brewer

                      >>> 

                      >>> On Sat, Sep 19, 2020 at 8:48 PM NW
                      Modeling List wrote:

                      >>> Other than Microscale, are there any
                      choices for HO scale N&W steam

                      >> locomotive decals that include the
                      builders plates and class badges? I

                      >> ordered Microscale's latest revision, and
                      while it does finally put

                      >> the builders plates and class badges in
                      more of a bronze or brass

                      >> color instead of dulux gold like the
                      lettering, it still has a poor

                      >> selection of classes repesented on the
                      plates and badges. There are no

                      >> A's, and no Y's other than Y6b. Their O
                      scale revision includes these

                      >> additional classes, so it is frustrating
                      that the HO version still

                      >> does not. I've looked around but can't
                      find any currently in

                      >> production other than Microscale. I know
                      the Champ sets don't have the

                      >> plates and badges I am looking for. Are
                      there any options besides

                      >> finding an appropriately sized "A" in
                      another set and combining it

                      >> with the Microscale?

                      >>> 

                      >>> Marty Flick

                      >>> 

                      >>>
                      ________________________________________

                      >>> NW-Modeling-List at nwhs.org

                      >>> To change your subscription go to

                      >>>>
                      ________________________________________

                      >>> NW-Modeling-List at nwhs.org

                      >>> To change your subscription go to

                      >>> 

                      >> ________________________________________

                      >> NW-Modeling-List at nwhs.org

                      >> To change your subscription go to

                      >> 

                      >> 

                      >> Links:

                      >> ------

                      >> [1] <>http://list.nwhs.org/mailman/options/nw-modeling-list<
                      a=""> />
                      >> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
                      a=""> />
                      >> /> Browse the NW-Modeling-List
                      archives at

                      >> </br<></a><a href=

                      >> 

                      >> -------------- next part --------------

                      >> An HTML attachment was scrubbed...

                      >> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/0d27884a/attachment-0001.html><
                      a=""> />
                      >> 

                      >> ------------------------------

                      >> 

                      >> Message: 6

                      >> Date: Sun, 20 Sep 2020 16:33:37 +0000

                      >> From: NW Modeling List
                      <nw-modeling-list at nwhs.org>

                      >> To: "'NW Modeling List'"
                      <nw-modeling-list at nwhs.org>

                      >> Subject: Re: HO scale decals

                      >> Message-ID:
                      <mailman.1096.1600619825.10487.nw-modeling-list at nwhs.org>

                      >> Content-Type: text/plain; charset="utf-8"

                      >> 

                      >> Microscale does offer their N&W steam
                      set in N scale. I believe it is

                      >> identical to the HO, so the limited
                      builders plates and class badges

                      >> remain. If Microscale were to further
                      revise their HO set, the N scale

                      >> would probably receive the same updates.

                      >> Marty Flick

                      >> 

                      >>
                      -----------------------------------------From: "NW
                      Modeling List" 

                      >> To: "NW Modeling List"

                      >> Cc: 

                      >> Sent: Sunday September 20 2020 11:43:08AM

                      >> Subject: Re: HO scale decals

                      >> 

                      >> I agree, But I doubt if it will be done,
                      We seem to be in the

                      >> minority 

                      >> 

                      >> Joe Grzelak

                      >> On 9/20/2020 3:21 AM, NW Modeling List
                      wrote:

                      >> It would be nice to have these decals in
                      n-scale. 

                      >> Jeff Wood 

                      >> 

                      >> ________________________________________
                      NW-Modeling-List at nwhs.org

                      >> [1] To change your subscription go to 

                      >> <>[2]http://list.nwhs.org/mailman/options/nw-modeling-list
                      [3] Browse

                      >> the NW-Modeling-List archives at 

                      >> [4]http://list.nwhs.org/pipermail/nw-modeling-list/
                      [5] 

                      >> 

                      >> Links:

                      >> ------

                      >> [1] mailto:NW-Modeling-List at nwhs.org

                      >> [2] http://list.nwhs.org/mailman/options/nw-modeling-list<
                      a=""> />
                      >> [3] <>http://list.nwhs.org/mailman/options/nw-modeling-list<
                      a=""> />
                      >> [4] <>http://list.nwhs.org/pipermail/nw-modeling-list/<
                      a=""> />
                      >> [5] <>http://list.nwhs.org/pipermail/nw-modeling-list/<
                      a=""> />
                      >> 

                      >> -------------- next part --------------

                      >> An HTML attachment was scrubbed...

                      >> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/d3915e97/attachment-0001.html><
                      a=""> />
                      >> 

                      >> ------------------------------

                      >> 

                      >> Message: 7

                      >> Date: Sun, 20 Sep 2020 16:40:33 +0000
                      (UTC)

                      >> From: NW Modeling List
                      <nw-modeling-list at nwhs.org>

                      >> To: nw-modeling-list at nwhs.org

                      >> Subject: Re: HO N&W Steam Decals

                      >> Message-ID:
                      <mailman.1100.1600620144.10487.nw-modeling-list at nwhs.org>

                      >> Content-Type: text/plain; charset="utf-8"

                      >> 

                      >> ?Up to the minute update: With the
                      assistance of the Society, ShellScale Decals will
                      be producing the steam set in 2021 in HO, O and N
                      Scale.?If you are familiar with our quality you
                      know this will be a good thing.?Richard D.
                      ShellShellScale Decals?In a message dated
                      9/20/2020 12:37:11 PM Eastern Standard Time,
                      nw-modeling-list at nwhs.org writes:?

                      >> Two questions then:?How do we show our
                      interest for the Society to gauge demand??Rather
                      than the Society invest in the production, could
                      you first engage with MicroScale to offer a
                      further update of their decal??Marty Flick

                      >> 

                      >> ?

                      >> -----------------------------------------

                      >> From: "NW Modeling List" 

                      >> To: "NW Modeling List"

                      >> Cc: 

                      >> Sent: Sunday September 20 2020 12:23:08PM

                      >> Subject: Re: HO N&W Steam Decals

                      >> 

                      >> Marty

                      >> 

                      >> The Society can do the N&W steam
                      decals, the Microscale set is a bit undersized for
                      the 10 inch letters. However, we have to order a
                      fairly high number of sets to keep the pricing
                      reasonable, and therefore demand must be there for
                      the investment of time.

                      >> 

                      >> They can be done with correct builder?s
                      plates and class plates (Class J plates were
                      chromed, I believe the streamlined K2 plates were
                      also chromed) and bronze for most of the others,
                      the Y3s were cast iron I know for sure, class
                      plates bronze.

                      >> 

                      >> We could also include the correct early
                      small cab size lettering, and the aluminum color
                      lettering for passenger power.

                      >> 

                      >> It all depends on demand.

                      >> 

                      >> Best

                      >> Ken Miller

                      >> 

                      >>> On Sep 20, 2020, at 10:41 AM, NW
                      Modeling List <nw-modeling-list at nwhs.org>
                      wrote:

                      >>> 

                      >>> Marty,

                      >>> 

                      >>> I checked the ShellSclae, K4, and
                      Tichy offerings but there is nothing really on
                      point; Tichy offers the stripe set for the J, and
                      has a generic set of builders plates. Otherwise
                      zilch. Perhaps the NWHS Modeling committee could
                      address this issue.

                      >>> 

                      >>> Jim Brewer

                      >>> 

                      >>> On Sat, Sep 19, 2020 at 8:48 PM NW
                      Modeling List <nw-modeling-list at nwhs.org>
                      wrote:

                      >>> Other than Microscale, are there any
                      choices for HO scale N&W steam locomotive
                      decals that include the builders plates and class
                      badges? I ordered Microscale's latest revision,
                      and while it does finally put the builders plates
                      and class badges in more of a bronze or brass
                      color instead of dulux gold like the lettering, it
                      still has a poor selection of classes repesented
                      on the plates and badges. There are no A's, and no
                      Y's other than Y6b. Their O scale revision
                      includes these additional classes, so it is
                      frustrating that the HO version still does not.
                      I've looked around but can't find any currently in
                      production other than Microscale. I know the Champ
                      sets don't have the plates and badges I am looking
                      for. Are there any options besides finding an
                      appropriately sized "A" in another set and
                      combining it with the Microscale?

                      >>> 

                      >>> Marty Flick

                      >>> 

                      >>>
                      ________________________________________

                      >>> NW-Modeling-List at nwhs.org

                      >>> To change your subscription go to

                      >>> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
                      a=""> /> > Browse the NW-Modeling-List
                      archives at

                      >>> <>http://list.nwhs.org/pipermail/nw-modeling-list/<
                      a=""> /> >
                      ________________________________________

                      >>> NW-Modeling-List at nwhs.org

                      >>> To change your subscription go to

                      >>> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
                      a=""> /> > Browse the NW-Modeling-List
                      archives at

                      >>> <>http://list.nwhs.org/pipermail/nw-modeling-list/<
                      a=""> /> 

                      >> ________________________________________

                      >> NW-Modeling-List at nwhs.org

                      >> To change your subscription go to

                      >> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
                      a=""> /> Browse the NW-Modeling-List
                      archives at

                      >> <>http://list.nwhs.org/pipermail/nw-modeling-list/<
                      a=""> />
                      <>________________________________________

                      >> NW-Modeling-List at nwhs.org

                      >> To change your subscription go to

                      >> http://list.nwhs.org/mailman/options/nw-modeling-list<
                      a=""> />
                      >> Browse the NW-Modeling-List archives at

                      >> <>http://list.nwhs.org/pipermail/nw-modeling-list/<
                      a=""> />
                      >> 

                      >> -------------- next part --------------

                      >> An HTML attachment was scrubbed...

                      >> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/f238e05e/attachment.html><
                      a=""> />
                      >> 

                      >> ------------------------------

                      >> 

                      >> Subject: Digest Footer

                      >> 

                      >> ________________________________________

                      >> NW-Modeling-List at nwhs.org

                      >> To change your subscription go to

                      >> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
                      a=""> />
                      >> Browse the NW-Mailing-List archives at

                      >> <>http://list.nwhs.org/pipermail/nw-modeling<
                      a=""> />
                      >> 

                      >> 

                      >> ------------------------------

                      >> 

                      >> End of NW-Modeling-List Digest, Vol 211,
                      Issue 10

                      >>
                      *************************************************

                      > ________________________________________

                      > NW-Modeling-List at nwhs.org

                      > To change your subscription go to

                      > <>http://list.nwhs.org/mailman/options/nw-modeling-list<
                      a=""> />
                      > Browse the NW-Modeling-List archives at

                      > <>http://list.nwhs.org/pipermail/nw-modeling-list/<
                      a=""> />
                      

                      ________________________________________

                      NW-Modeling-List at nwhs.org

                      To change your subscription go to

                      <>http://list.nwhs.org/mailman/options/nw-modeling-list<
                      a=""> />
                      Browse the NW-Modeling-List archives at

                      <>http://list.nwhs.org/pipermail/nw-modeling-list/<
                      a=""> />
                      <>

                  

                

                ________________________________________

                NW-Modeling-List at nwhs.org

                To change your subscription go to

                http://list.nwhs.org/mailman/options/nw-modeling-list

                Browse the NW-Modeling-List archives at

                http://list.nwhs.org/pipermail/nw-modeling-list/

              

            

          

        
 
      

      
      ________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

    
    
-- 

      Walter Davis

  


<walterdavis.vcf>
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/



________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/


-------- Original message --------From: NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org> Date: 9/27/20  5:05 PM  (GMT-05:00) To: nw-modeling-list at nwhs.org Cc: NW Modeling List <nw-modeling-list at nwhs.org> Subject: Re: HO scale K2 was HO Scale decals (NW Modeling List) ________________________________________NW-Modeling-List at nwhs.orgTo change your subscription go tohttp://list.nwhs.org/mailman/options/nw-modeling-listBrowse the NW-Modeling-List archives athttp://list.nwhs.org/pipermail/nw-modeling-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200927/a496d797/attachment-0001.html>


More information about the NW-Modeling-List mailing list