K-2 question

[NW Modeling List]

Jimmy
 
I'll have to check my model and see how it is attached. I still suspect that the bell on the model is either mounted wrong or too large and interferes with the air pump.
 
Jim Kehn
 
 
-----Original Message-----
From: NW Modeling List <nw-modeling-list at nwhs.org>
To: NW Modeling List <nw-modeling-list at nwhs.org>
Sent: Wed, Mar 22, 2017 3:09 pm
Subject: Re: K-2 question



On 3/9/2017 5:06 PM, NW Modeling List wrote:

The bell was not installed under the steps as on the model but on the pilot beam with a plain steel strap bracket.
As shown below.

Jimmy Lisle



Moderator:
http://www.nwhs.org/archivesdb/detail.php?ID=47485


________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20170322/e0deef25/attachment.html>