N&W Info Needed

[NW Modeling List]

If this goes through, attached is a photo of the air line on a Southern
GP35 which may be similar.

All the best,
mike garber

Moderator:
 http://nwhs.org/mailinglist/2015/20151110.Step_14B_detail.jpg

----- Original Message -----
*From:* NW Modeling List <nw-modeling-list at nwhs.org>
*To:* NW Modeling List <nw-modeling-list at nwhs.org>
*Sent:* Tuesday, November 10, 2015 3:26 PM
*Subject:* RE: N&W Info Needed

Erik:

1)  Attached is a photo of the nose that show part of the bell air line.
Once is extended to the nose it went straight down into the nose.

2)  Also I find photos of the 1776 with the firecracker antenna from 5/74
on. Same Photo attached. Photo by Buffalo NY - 05/74 - {Don Coppola Photo}

3) Just in case red inside of bell.


Moderator:
 http://nwhs.org/mailinglist/2015/20151110.nw1776cdc.jpg


*From:* NW-Modeling-List [mailto:nw-modeling-list-bounces at nwhs.org] *On
Behalf Of *NW Modeling List
*Sent:* Friday, November 06, 2015 5:04 PM
*To:* NW Modeling List
*Subject:* Re: N&W Info Needed



Stephen, to my eye, the Southern and N&W SD45's both had the same bell and
bracket.  The bell and bracket on some of the earlier first generation
diesels seemed to be different with Southern's looking like a shop
fabricated piece.  Hope this helps.  That thing will be a beast in O
scale!!!


All the best,

mike garber

----- Original Message -----

*From:* NW Modeling List <nw-modeling-list at nwhs.org>

*To:* 'NW Modeling List' <nw-modeling-list at nwhs.org>

*Sent:* Friday, November 06, 2015 4:44 PM

*Subject:* RE: N&W Info Needed



Mike:

This is for the SD45 the Midwestern Model Works is doing in O Scale.

Stephen

*From:* NW-Modeling-List [mailto:nw-modeling-list-bounces at nwhs.org
<nw-modeling-list-bounces at nwhs.org>] *On Behalf Of *NW Modeling List

*Sent:* Friday, November 06, 2015 9:53 AM
*To:* NW Modeling List
*Subject:* Re: N&W Info Needed



Stephen, I've always felt the bell brackets were a little bit different
depending on what locomotive you are interested in.  If you can say what
loco you are interested in it might help a bit.



All the best,

mike garber

----- Original Message -----

*From:* NW Modeling List <nw-modeling-list at nwhs.org>

*To:* 'NW Modeling List' <nw-modeling-list at nwhs.org>

*Sent:* Thursday, November 05, 2015 5:42 PM

*Subject:* RE: N&W Info Needed


Does anyone know if the N&W and Southern bells are the same?
Stephen Rineair
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20151110/c107c7cf/attachment-0001.html>