4-8-0 "survey" results

NW Modeling List nw-modeling-list at nwhs.org
Wed Jul 29 12:17:11 EDT 2015


    
   I like the idea of a larger tender. More accurate for late steam. I would be interested in a couple of these models in any configuration.     Chris Wrenn.


Sent from my U.S. Cellular® Smartphone

-------- Original message --------
From: NW Modeling List <nw-modeling-list at nwhs.org> 
Date: 07/29/2015  7:39 AM  (GMT-05:00) 
To: NW Modeling List <nw-modeling-list at nwhs.org> 
Subject: Re: 4-8-0 "survey" results 





The tender on 475 was not used on very many M’s.  They used larger tenders.  This would allow for many more numbers/runs.  The extra axles will provide better electrical pick-up too. 


-- 


Mark Lindsey
Stuck in the 1930’s






From: NW-Modeling-List <nw-modeling-list-bounces at nwhs.org> on behalf of NW Modeling List <nw-modeling-list at nwhs.org>

Reply-To: NW Modeling List <nw-modeling-list at nwhs.org>

Date: Tuesday, July 28, 2015 at 12:06 PM

To: NW Mailing List <nw-mailing-list at nwhs.org>, NW Modeling List <nw-modeling-list at nwhs.org>

Subject: 4-8-0 "survey" results








I thought I should share the results.  We got a significant number of suggestions (mostly tactful, some not)that we clarify which M we were talking to the manufacturer/importer about.  Our discussions hadn't reached that level, as we were simply exploring
 the possibility of a "low price" N&W 4-8-0.  The results of the survey made it clear that our best bet is the M, specifically the way it looks (tender, fittings, etc.)at Strasburg today.  It is clear to most of our members that some mass-market appeal will,
 we think, substantially increase the viability of this project.
 
I got some comments about getting my M, M-1, and M-2 straighter in my mind.  I don't have it where I want it, but I'm a lot closer than I was two weeks ago (thank you, again, and as always, Col. Jeffries and Harold Davenport).
 
We got a good number of "You should do the M in a version with variations, especially tenders"; we're going to pass that on, but the cost-effectiveness of that will be determiend by the manufacturer/importer. 

 
We got a good number of "Instead of an M you guys should do []".  We're listening to all of that, but some are probably less likely than others.  I'd like an LC-2, but I'm not holding my breath.
 
And, we got a surprising number of "at that price I'd be interested in one or two".  I'm quite pleased we did this. 

 
We forwarded the results and constructive suggestions to the manufacturer/importer.  We've been asked to keep "his" name quiet for the time being.  It's not Broadway, but we're looking at that type of model with that level of quality and in that price
 ballpark.  We will keep you posted as to what happens next.
 
For those of you who replied with expressions interest and constructive suggestions/comments/cirticism, thank you.

 
Frank Bongiovanni, NWHS Modeling Committee 
 




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20150729/5aea738d/attachment.html>


More information about the NW-Modeling-List mailing list