N&W passenger cars

NW Modeling List nw-modeling-list at nwhs.org
Fri May 22 14:11:33 EDT 2015


Walthers is releasing an 85' Pullman Standard smooth side 56 seat coach.  They will offer it decorated for N&W.  The window arrangement of the model does not match any prototype N&W coach that I am aware of.  Caveat emptor! 
Jim Brewer 
----- Original Message -----

From: "NW Modeling List" <nw-modeling-list at nwhs.org> 
To: "NW Modeling List" <nw-modeling-list at nwhs.org> 
Sent: Friday, May 22, 2015 12:25:41 PM 
Subject: RE: N&W passenger cars 



Lee: 

  

MTH produced a 5 car Powhatan Arrow set in HO, with interiors and interior lighting; see http://mthtrains.com/news/475 .  I can’t speak to the accuracy of the window placements, etc, but the MTH passenger cars have always had a great appearance and they run well. 

  

Overland, Key and Sunset all produced brass sets.  The Key and Sunset sets did not have interiors; I’m not sure about the Overland set, but the latter usually bring over $1500 on eBay, whereas the Key sets can be had for $500 - $700. 

  

Key, Roanoke Rails, and Balboa produced single cars as well, all without interiors.  I don’t think the RR or Balboa cars came factory painted, but am not sure.  The RR S1 10-6 sleepers look pretty good to me, if you can paint.  Key offered at least the P3 coaches individually. 

  

Division Point produced the BEj, an RPO (#96 at least), a diner (#1024 at least), and Business Car 101.  All are gorgeous, and priced accordingly—the diner alone will probably set you back more than the entire MTH set. At least the baggage, diner and business car were offered in both tuscan and blue colors. 

  

Railworks produced several very nice variants of the PRR BM-60b baggage/mail cars.  If you get the variant with the wagon-top roof, no vents, you can add the 4 globe vents over the 15’ RPO area to make a good replica of a N&W BMj.  (Check photos for vent type and placement.) 

  

If you’re modeling an excursion train, they will probably run a generic LWT baggage or two up front, rather than a BEj.  A Walthers or Rapido model would probably work fine. 

  

And, finally, it’s worth a trip to the Tennessee Valley RR Museum ( http://www.tvrail.com/pages/ride-the-train ) to look at their restored N&W passenger cars (and a lot of other cool stuff as well—neat place!) 

  

Best Regards, 

  

-Eric Bott 

  

From: NW-Modeling-List [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List 
Sent: Thursday, May 21, 2015 4:12 PM 
To: NW Modeling List 
Subject: N&W passenger cars 

  

Good evening, 

Does anyone know if any of the model manufacturers will be producing N or HO scale passenger cars with the return of the 611?  I have the newer N Scale Bachmann 611 and wondered if Kato, etc has approached the NWHS about passenger cars.   

Thank you, 

Lee Burns 

________________________________________ 
NW-Modeling-List at nwhs.org 
To change your subscription go to 
http://list.nwhs.org/mailman/options/nw-modeling-list 
Browse the NW-Modeling-List archives at 
http://list.nwhs.org/pipermail/nw-modeling-list/ 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20150522/5fb0f736/attachment-0001.html>


More information about the NW-Modeling-List mailing list