N&W 2156

NW Modeling List nw-modeling-list at nwhs.org
Mon Feb 2 16:35:01 EST 2015


Harold, 
Great! Thanks in advance and best of luck with the project. I anxiously await the article!
Roger HuberDeer Creek Locomotive Works


      From: NW Modeling List <nw-modeling-list at nwhs.org>
 To: NW Modeling List <nw-modeling-list at nwhs.org> 
 Sent: Monday, February 2, 2015 1:35 PM
 Subject: Re: N&W 2156
   
Roger: One of my goals in doing this conversion was to document and write and article for the Arrow.  I am also going to send the article to Broadway Limited.   Harold 

   

  On Monday, February 2, 2015 9:07 AM, NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org> wrote:
   

 Harold,
Congratulations on getting "new eyes" with which to persue your modeling and other things. 

Have you thought about doing an article on your Y-6a conversion for the Arrow? I'm sure many folks would benefit from your work. Good luck with the project.

Roger HuberDeer Creek Locomotive Works

      From: NW Modeling List <nw-modeling-list at nwhs.org>
 To: NW Modeling List <nw-modeling-list at nwhs.org> 
 Sent: Sunday, February 1, 2015 4:41 PM
 Subject: Re: N&W 2156
   
Phil: You make a good point. We have Y6b's running out our ears but no real "affordable" Y6a's or Y6's. Division Point imported some beautiful Y6 and Y6a models in brass about a year ago. They were priced at around $2500.00. I have seen a couple on ebay  that sold for about $2100.00.  After Broadway Limited released the last run of Y6b's, I asked them to consider retooling the boiler to produce Y6's and Y6a's. I got no response.  After my recent cataract operation, I can now see well enough to resume converting a Broadway Y6b into a Y6a. I will keep the Y6b tender underframe with the electronics but will replace the tender superstructure with a class C superstructure from the Broadway class A 2-6-6-4. The class I tender superstructure from the Y6b will go to the class A.   The trucks from the class I tender will be replaced with non-roller bearing trucks I purchased from Bethlehem Car Works. Some additional detail will be added to the tender.  The big change for the boiler/smokebox casting on the locomotive is the shortening of the smokebox.  The Y6b has an extended smokebox to accommodate the SA feedwater heater. The Y6a used the BL feedwater heater and had a shorter smokebox. To keep the model as accurate as possible, only a selected number of Y6a's can be modeled from the Broadway Y6b. The Broadway model has a lagged smokebox and only a few Y6a's had this improvement. Y6a number 2157 will be the number I select.  I have not made the cut to the smokebox yet. I am still working on correct measurements for placing the cut and whether or not I will have to remove the smoke unit in the smokebox.  Other changes will include adding the BL feedwater heater on the engineer's side and dual air pumps on the firemans side.  The handraillings on the front engine will also have to be reworked.  And for Frank ( and myself), I plan to block the rear engine from swiveling.  One of the reasons I am proceeding with this conversion is that the initial price of the Broadway locomotive is reasonable. I would not dare attempt this conversion on a brass model. Harold Davenport  

   

  On Sunday, February 1, 2015 5:03 PM, NW Modeling List <nw-modeling-list at nwhs.org> wrote:
   

 #yiv4257756497 -- filtered {panose-1:2 4 5 3 5 4 6 3 2 4;}#yiv4257756497 filtered {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;}#yiv4257756497 p.yiv4257756497MsoNormal, #yiv4257756497 li.yiv4257756497MsoNormal, #yiv4257756497 div.yiv4257756497MsoNormal {margin:0in;margin-bottom:.0001pt;font-size:12.0pt;color:black;}#yiv4257756497 a:link, #yiv4257756497 span.yiv4257756497MsoHyperlink {color:blue;text-decoration:underline;}#yiv4257756497 a:visited, #yiv4257756497 span.yiv4257756497MsoHyperlinkFollowed {color:purple;text-decoration:underline;}#yiv4257756497 span.yiv4257756497EmailStyle17 {color:blue;}#yiv4257756497 .yiv4257756497MsoChpDefault {font-size:10.0pt;}#yiv4257756497 filtered {margin:1.0in 1.0in 1.0in 1.0in;}#yiv4257756497 div.yiv4257756497WordSection1 {}#yiv4257756497 Has anyone heard of any plans to build/sell an affordable HO- (or N-) scale model of the Y6a 2156 that’s supposed to move from St. Louis to Roanoke sometime this year? Seems like the timing of that would be perfect for a model release and make someone some money.  It would be nice if the model didn’t have the rear engine turning separate from the boiler. I know this is probably wishful thinking, but…     There are lots of Y6b’s running around but not much otherwise that I’ve seen, of Y-class models.  Phil Miller  
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

    
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

   
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

    
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20150202/b2f91021/attachment.html>


More information about the NW-Modeling-List mailing list