HO Brass radius

NW Modeling List nw-modeling-list at nwhs.org
Fri Feb 11 13:49:10 EST 2011


There is an E-3 and K-3 out there right now.

Will Sadler
Salisbury, NC

On Fri Feb 11th, 2011 11:45 AM EST NW Modeling List wrote:


>I don't know if you've ever bought or sold on eBay or not......I do a lot of this....perhaps too much at times (at least buying).. From day to day you never know what will show up for sale. W-2's, M's, E--2a's and such show with some degree of regularity. Prices are erratic. Sometimes things go sell well below there market value and sometimes the selling price is beyond common sense and reason. If your concerned about what to expect when buying a model from someone you don't know go read his eBay feedback. That will pretty well give you confidence that he is a reputable seller or not. I have several N&W searches setup on ebay under HO Gauge model trains. Norfolk and Western, Norfolk & Western, N&W, and NW. Another way to locate specific models available and for sale is to do internet searches; Northwest Short Line, N&W Brass W-2, N&W brass E2a , brass HO models, N&W brass, imported brass HO models. and such. The search "Brass HO Model Railroad

Dealers" brings um a b

> unch of information and dealers. It's amazing what you find.by doing different searches. These searches aren't limited to anything.

>

>A gentleman recently asked about railroads in Winchester, VA. I did a search and found a Web Site devoted to railroads of Northern Virginia with maps, histories, and all other sorts of information on operations in and out of Winchester.

>

>Ed Painter - Narrows, VA current living in snow covered and cold Arkansas.

>

>

>________________________________________

>From: nw-modeling-list-bounces at nwhs.org [nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List [nw-modeling-list at nwhs.org]

>Sent: Friday, February 11, 2011 7:39 AM

>To: NW Modeling List

>Subject: Re: HO Brass radius

>

>I suggest the NWSL "W" class 2-8-0. They were used into the late 1940's

>and were similar to the M's. They had the same boiler, wheel diameter and I

>think cylinders and early Baker valve gear. Since I model the 1930's It was

>almost a necessity to get one. I have 2 M's and 7 Powerhouse Y3's, a Z1 and

>a K3.

>

>

>Mark Lindsey

>Stuck in the 1930's

>

>

>On 2/10/11 5:23 PM, "NW Modeling List" <nw-modeling-list at nwhs.org> wrote:

>

>> So the Sunset M purchase fell through. The guy wasn't ready to part with it. I

>> don't blame him, they are beautiful models.

>>

>> I'm now looking around for more options for smaller steam. I'm trying to get

>> something that can handle work on a branch line with 22" and some 18" radius

>> curves.

>>

>> I've looked at an E2a and S1. Anyone own these and can vouch for running

>> ability on curves/in general?

>>

>> I'm really interested in the NWSL E2a. Is it best to regear/remotor?

>>

>> Thanks in advance,

>> Brad

>>

>>

>> ________________________________________

>> NW-Modeling-List at nwhs.org

>> To change your subscription go to

>> http://list.nwhs.org/mailman/options/nw-modeling-list

>> Browse the NW-Modeling-List archives at

>> http://list.nwhs.org/pipermail/nw-modeling-list/

>

>--

>

>

>Mark Lindsey

>ODIN Desktop Support

>Cell-202-345-6402

>

>

>

>

>

>________________________________________

>NW-Modeling-List at nwhs.org

>To change your subscription go to

>http://list.nwhs.org/mailman/options/nw-modeling-list

>Browse the NW-Modeling-List archives at

>http://list.nwhs.org/pipermail/nw-modeling-list/

>________________________________________

>NW-Modeling-List at nwhs.org

>To change your subscription go to

>http://list.nwhs.org/mailman/options/nw-modeling-list

>Browse the NW-Modeling-List archives at

>http://list.nwhs.org/pipermail/nw-modeling-list/







More information about the NW-Modeling-List mailing list