restoring position light signal

NW Modeling List nw-modeling-list at nwhs.org
Fri Oct 29 13:56:29 EDT 2010


Thanks Richard and Greg!

This helps me a whole lot.

What is used to change the aspects of the signal every few minutes?

Stephen Rineair



From: nw-modeling-list-bounces at nwhs.org
[mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List
Sent: Friday, October 29, 2010 12:42 PM
To: nw-modeling-list at nwhs.org
Subject: Re: restoring position light signal



Here's another place you might want to check for transformers, as well as
oddball bulbs and electronics. They also get a lot of surplus stuff from the
military and NASA. If you don't see what you need in their on-line catalog,
give them a call or e-mail.



Greg Harrod



http://www.skycraftsurplus.com/



========================================

In a message dated 10/29/2010 11:14:06 A.M. Eastern Daylight Time,
nw-modeling-list at nwhs.org writes:

Stephen,



Your best bet with the bulbs is to replace all of them with standard 1156
automotive bulbs. The original bulbs are 9 volt I believe and are hard to
find and expensive. I used to get my 12v transformers at Radio Shack but
haven't found them there lately. My last power supply was from a computer
laptop charger rated at 12 volts. They can be had cheap on Ebay.



Thanks,



Richard D. Shell

Troutville, VA



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20101029/9286e72d/attachment.htm>


More information about the NW-Modeling-List mailing list