N&W V-1 Scrap dates

[NW Modeling List]

At least two V-1's were used in Norfolk Terminal as switch engines until the S1's came in 1950. Harold Davenport 

--- On Mon, 1/25/10, NW Modeling List <nw-modeling-list at nwhs.org> wrote:


From: NW Modeling List <nw-modeling-list at nwhs.org>
Subject: Re: N&W V-1 Scrap dates
To: "NW Modeling List" <nw-modeling-list at nwhs.org>
Date: Monday, January 25, 2010, 4:58 PM






Can anyone shed any light on where the last four V-1's (950,951, 954 & 956) would have been used until their retirement?

Charlie

--- On Mon, 1/25/10, NW Modeling List <nw-modeling-list at nwhs.org> wrote:


From: NW Modeling List <nw-modeling-list at nwhs.org>
Subject: N&W V-1 Scrap dates
To: "'NW Modeling List'" <nw-modeling-list at nwhs.org>
Date: Monday, January 25, 2010, 7:46 PM








How about V-1 4-6-0’s?   The N&W didn’t show any V-2’s on the roster.
 
950- 10/48 
951- 1/47 
952- 8/31 
953- 11/34 
954- 4/50 
955- 10/29 
956- 4/50 
957- 8/29 
958- 10/29 
969- 8/29
960- 11/35 
961- 7/34 
962- 10/33
963- 8/29 
964- 10/33 
965- 8/29 
966- 8-29 
  
The dates shown are recorded as dismantle dates by Roanoke Shops.  
  
Gary Rolih 
Cincinnati 
  
  


 




From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List
Sent: Saturday, January 23, 2010 4:48 PM
To: NW Modeling List
Subject: Re: Accurate late steam era HO scale N&W freight car models?
  




anyone have any clues as to how long the V-2 Tenwheelers were in service? thanks. tony putnam 

--- On Sat, 1/23/10, NW Modeling List <nw-modeling-list at nwhs.org> wrote: 

From: NW Modeling List <nw-modeling-list at nwhs.org>
Subject: Re: Accurate late steam era HO scale N&W freight car models?
To: "NW Modeling List" <nw-modeling-list at nwhs.org>
Date: Saturday, January 23, 2010, 4:32 PM 


Don't forget the FD flats and HL hoppers offered by the Society.

 

EdKing


 


From: NW Modeling List 

Sent: Friday, January 22, 2010 8:45 PM

To: NW Modeling List 

Subject: Re: Accurate late steam era HO scale N&W freight car models?

 





hello Aaron you and me both. I have started collecting freight cars as well. This is the way I started. 

Walthers made a wooden 40' box car in the 80s.

Accurail has a 40' outside braced 40' box car

Roundhouse had a 40' standard and roundroof box cars
Bowser makes the round roof box car 40' and 50' 

Accurail had a 40' double door box car kit

Roundhouse made a covered hopper kit

Athearn makes a 40' and 50' flat car

Athearn had done a 50' double door kit box car

Athearn made a 62' mill gondola a few years ago

Roundhouse made a 40' gondola one with 2 ribs on end and one with 3 ribs on end

Ulrich made a 40' composite side gondola

Walthers also made a 2 bay hopper, but it says H2a which is wrong

Athearn makes a larger covered hopper

Athearn makes a 2 bay peaked end hopper

Accurail makes a 2 bay hopper

Roundhouse made a 3 bay hopper Athearn will be rereleasing them in march yeah!! can't wait!

Bowser makes the 2 bay fishbelly hopper

and last the caboose kit is offered by AMB Laser kits.

just thought I'd share my info with you. tony putnam 
--- On Fri, 1/22/10, NW Modeling List <nw-modeling-list at nwhs.org> wrote:


From: NW Modeling List <nw-modeling-list at nwhs.org>
Subject: Accurate late steam era HO scale N&W freight car models?
To: nw-modeling-list at nwhs.org
Date: Friday, January 22, 2010, 4:13 PM 


This is my first post to the list, and I'm certain this question has been asked before, probably many times. However I have not seen an answer to it online, and as such I'm asking here, since I figure it's unlikely there's a group more knowlegable on the subject.

 

My question is, can anyone give me a list, or even just a few recomendations, of decently prototypically accurate HO scale models of late steam era N&W freight cars, preferably plastic kits, or RTR plastic, though craftsman kits are fine if there's no decent plastic alternative. I want to put togather a couple of N&W freight trains, one general freight, one a coal drag, and I need to know what reasonably priced options there are out there. I know almost nothing about what's available in the way of decently accurate models, asside from the bowser fishbelly 55 ton and the BLI H2a.

 

Any and all information you can give me, be it information on specific models, or a link to somewhere I can find this information, will be greatly appreciated.

 

-Aaron Falis

-----Inline Attachment Follows----- 

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
  




________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/ 

-----Inline Attachment Follows----- 

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
 
-----Inline Attachment Follows-----


________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
-----Inline Attachment Follows-----


________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20100125/11aad363/attachment.htm>