Modeling Committee

NW Modeling List nw-modeling-list at nwhs.org
Fri Feb 13 17:14:47 EST 2009


Jim and Bill:
I do not understand your comments about the modeling committee "taking another wack".
Please explain to us why we are not to ask what the committee is working on. No harm in that is there?
Also Bill why can not the society members answer or take suggestions on the forum. I thought this is one the purposes
is to communicate with each other. Yes I know they are volunteers, but a couple minutes shouldn't put anyone out. My past post does not contain any negative comments about the committee, and IF anyone has gotten that impression I apologize.

Happy modeling
Stephen Rineair


---- Original Message -----
From: NW Modeling List
To: NW Modeling List
Sent: Friday, February 13, 2009 12:40 PM
Subject: Re: Modeling Committee


Thanks, Bill. I hope this clears the air. Based on past posts, I doubt it will be remembered long. Jim Nichols
----- Original Message -----
From: NW Modeling List
To: nw-modeling-list at nwhs.org
Sent: Friday, February 13, 2009 9:22 AM
Subject: Modeling Committee


Spring must be coming; it's time to take another whack at the Modeling Committee. Give the guys a break! Where does one think the DP heavyweight project came from? Harold Davenport and others have been working with, and on DP for years on several N&W/VGN projects. That the projects don't reach the market, or reach the market with flaws doesn't diminish the hard, persistent work that has gone into providing the data. As I said a couple of years ago, there are limits to what can be accomplished with commercial firms that have their own interests and concerns. We can provide data, but they do what they do, when they want to do it.

Re the Yoder gons: we published his beautiful CAD drawings for those cars in the Arrow and solicited interest in an HO version; we got zero interest...zero, not one indication of interest. Rich had said he would consider it if he had enough interest; we didn't respond so he moved on. And as a sidelight, the data for the O scale versions was provided by members of the Society and from our Archives. The result is the most accurate G3/G4 ever produced. (Of course, now F&C produces a much improved HO resin kit version of the cars in a one-piece body at a fraction of the cost of an HO brass version. Steve and Sharon responded to persistent requests from NWHS members to update their resin kit. One suspects they used data from the Yoder car to do that.)

Re VGN hoppers: the Commissary offers a set of Bowser H3 hoppers in the as-built lettering, the data for which was provided by Harold Davenport and is spot on, and Bowser markets the same hopper in the later lettering. Projects undertaken by Bob Bowers for the Commissary have to be as commecially viable, or more so, than for commercial firms. The money he has at his disposal is limited and precious. He has been at his job for many years and he has as good a feel for what members will actually buy, as opposed to what they say they want, as anyone in the Society. He does a great job with what he has available.

At the recent show in Springfield, Broadway was asked what happened to the CF caboose to go with the locos; "not enough interest" was the response. They were asked to reconsider.

Russ Goodwin has great contacts within the major manufacturers and has worked hard to interest them in N&W/NS projects. But again, the manufacturers have their own agendas. The late Jim Gillum worked tirelessly on model projects; Jim Brewer produced beautiful resin kits of two N&W cars. And no one has worked harder on the subject of accuracy than Jim Nichols. I am sure there are others who have worked behind the scenes to get stuff done. My point is that the NWHS modeling community has accomplished quite a bit; that it has not satisfied every desire, or responded to every fleeting idea should not diminish the efforts of a number of dedicated members.

Now, how about an HU hopper!! Been trying for years, in plastic, resin and brass, alas....

Bill McClure


------------------------------------------------------------------------------


________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/


--------------------------------------------------------------------------------


________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20090213/73780492/attachment.htm>


More information about the NW-Modeling-List mailing list