PSC or PCM Brass Y6b

NW Modeling List nw-modeling-list at nwhs.org
Fri Aug 17 21:58:57 EDT 2007



There are two models of articulatred locomotives that have rigid rear engines, unfortuntely they are not N&W prototypes. Intermountain 's SP cab forward and the old Mantua 2-6-6-2 logging locomotivo live.e.

Kurt S. Kramke on his way to Roanoke t
-----Original Message------
From: NW Modeling List <nw-modeling-list at nwhs.org>
To: NW Modeling List <nw-modeling-list at nwhs.org>
Date: Wed, 15 Aug 2007 23:39:51 -0500
Subject: Re: PSC or PCM Brass Y6b

The PCM model is beautiful. I have one, and am well pleased with the
detail. The PSC brass model has one advantage, however. The rear engine
is rigidly mounted to the boiler, which is prototypically correct,
whereas the PCM model follows current model practice of allowing both
engines to swivel. If this matters to you, then the PSC is your choice.
If not, I would go with the PCM. Jim Nichols

NW Modeling List wrote:


> All,

>

> I am interested in purchasing either the PSC Brass Y6b that came

> out in the mid to late 90s or the PCM model recently released.

> Any comments on which is the more prototypically correct model? I

> realize PCS is brass, however the diecast/plastic models have

> greatly improved in the past 10 or so years. Money is not the

> issue here, although if the PCM is the better bet, I sure would

> not mind the savings.

> I looked over the past archives and did not see this question

> addressed in any detail.

>

> Thanks for any help in advance! Steve Clark

>

>

>------------------------------------------------------------------------

>

>________________________________________

>NW-Modeling-List at nwhs.org

>To change your subscription go to

>http://list.nwhs.org/mailman/options/nw-modeling-list

>Browse the NW-Mailing-List archives at

>http://list.nwhs.org/pipermail/nw-modeling-list/

>







More information about the NW-Modeling-List mailing list