PCM Y6b's

[nw-modeling-list at nwhs.org]

Nigel - attached is the letter to PCM that will go in tomorrow's mail.

Ed King
----- Original Message ----- 
From: <nw-modeling-list at nwhs.org>
To: "N and W Modeling List" <nw-modeling-list at nwhs.org>
Sent: Saturday, May 20, 2006 10:02 PM
Subject: Re: PCM Y6b's



> Hi Ed;

>

> Have you sent these comments to PCM?

>

> Thank you

> Nigel F Misso

>

> ----- Original Message ----- 

> From: <nw-modeling-list at nwhs.org>

> To: "N and W Modeling List" <nw-modeling-list at nwhs.org>

> Sent: Friday, May 19, 2006 5:25 PM

> Subject: Re: PCM Y6b's

>

>

>> So I got mine yesterday, and put it on the programming track today.

>>

>> Comments:  Valve gear is not acceptable.  If Proto can put acceptable 

>> valve gear on the Y-3s, why can't these folks put it on the Y-6b?  And 

>> Broadway on the N&W A, for that matter?

>>                     Sound is barely acceptable; the exhaust sound is 

>> confusing to say the least.  Other sounds are OK; a nice touch is the 

>> splash of water from the injector overflow after the injector shuts off.

>>                     Programming is OK.

>>                     Power - not acceptable.  My Broadway 1218 will shove 

>> the Y-6b right off the test track without slipping a driver (I haven't 

>> tested it against my Y-3s).  The Y-6b will not budge the A if the A is 

>> not under power.

>>                     Tender is heavy all right, but I guess that's because 

>> of the big speaker.

>>

>> Ed King

>>

>> ----- Original Message ----- 

>> From: <nw-modeling-list at nwhs.org>

>> To: "N and W Modeling List" <nw-modeling-list at nwhs.org>

>> Sent: Thursday, May 18, 2006 9:22 AM

>> Subject: Re: PCM Y6b's

>>

>>

>>> There, there, David.  Everything's gonna be OK.  Let not your heart be 

>>> troubled . . .

>>>

>>> EdKing

>>> ----- Original Message ----- 

>>> From: <nw-modeling-list at nwhs.org>

>>> To: "N and W Modeling List" <nw-modeling-list at nwhs.org>

>>> Sent: Thursday, May 18, 2006 7:41 AM

>>> Subject: Re: PCM Y6b's

>>>

>>>

>>>> It's probably my imagination, but....

>>>>

>>>> Is there something proportionately off about the front

>>>> end of PCM's Y6b?  All the individual parts are great,

>>>> but the front view on the website doesn't look right.

>>>> Is the headlight a bit too high?  The Y6b bracket was

>>>> different from the other Y6's and the headlight was

>>>> located lower relative to the number plate.  Gave the

>>>> Y6b a less squatty appearance from  the front.

>>>>

>>>> Maybe I'm just having a rivet-counter relapse.  Try to

>>>> keep it under control but don't always succeed.

>>>>

>>>> Dave Stephenson

>>>>

>>>>

>>>>

>>>> __________________________________________________

>>>> Do You Yahoo!?

>>>> Tired of spam?  Yahoo! Mail has the best spam protection around

>>>> http://mail.yahoo.com

>>>> ________________________________________

>>>> NW-Modeling-List at nwhs.org

>>>> To change your subscription go to

>>>> http://list.nwhs.org/mailman/options/nw-modeling-list

>>>>

>>>

>>>

>>> ________________________________________

>>> NW-Modeling-List at nwhs.org

>>> To change your subscription go to

>>> http://list.nwhs.org/mailman/options/nw-modeling-list

>>>

>>

>>

>> ________________________________________

>> NW-Modeling-List at nwhs.org

>> To change your subscription go to

>> http://list.nwhs.org/mailman/options/nw-modeling-list

>

> ________________________________________

> NW-Modeling-List at nwhs.org

> To change your subscription go to

> http://list.nwhs.org/mailman/options/nw-modeling-list

> 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: PCM5-21-06.let.doc
Type: application/msword
Size: 23552 bytes
Desc: not available
Url : http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20060521/e98bf55c/PCM5-21-06.let-0001.doc