pumps on K1

[NW Mailing List]

The one on the fireman's side is the feedwater heater, and the two pumps on the engineer's side are air pumps (for the braking system) All have been available in HO as detail parts. For the air pumps, I used to buy cheap plastic models, like the Monogram Hudson (no longer produced) just for the detail parts. At the time, it was cheaper than buying brass parts separately.

Jim Nichols
 

________________________________
 From: NW Mailing List <nw-mailing-list at nwhs.org>
To: "nw-mailing-list at nwhs.org" <nw-mailing-list at nwhs.org> 
Sent: Monday, February 3, 2014 3:02 PM
Subject: pumps on K1
  


What does the large flat device on the fireman side of a K-1 do?

http://www.nwhs.org/archivesdb/detail.php?ID=990

Do you know where to get an HO scale one?  There are two smaller pumps (or whatever) on the engineers side.
What do they do?

Thank you,
Mike Shockley
________________________________________
NW-Mailing-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-mailing-list
Browse the NW-Mailing-List archives at
http://list.nwhs.org/pipermail/nw-mailing-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-mailing-list/attachments/20140203/ede95c33/attachment.htm>