Disparaged Y class engines!

NW Mailing List nw-mailing-list at nwhs.org
Wed Jun 26 20:24:25 EDT 2013


Canteens? I thought it was for tenders for the Y4 class engines.
Lois J. Ponton
N&W steam historian



Sent from my Galaxy S®III

-------- Original message --------
From: NW Mailing List <nw-mailing-list at nwhs.org>
Date: 06/26/2013 8:21 PM (GMT-05:00)
To: nw-mailing-list at nwhs.org
Subject: Re: Disparaged Y class engines!




Not true. The only engine that had problems with counter balancing was the K3 4-8-2's, which had their main siderod connected to driver #3 instead of #2 for more starting TE. They pounded the rails as driver #3 hopped above 38mph and it was those engines that were restricted to 35mph.

 Not an N&W locomotive, but ACL's Baldwin-built Class R-1 4-8-4's had a counter balancing problem
also.  They were cranked to the 2nd driver.  After a series of broken rails, cameras were mounted on
the R-1s to record the rotation of the drivers.  It revealed that at high speed (ACL was rigged for 90 MPH
running) one set of drivers would lift off the rail.  They lasted about a year in passenger service to
be replaced by EMD E-3s.  Following a derailment at Stockton, GA (47 killed, 41 injured), ICC
Investigation 2813 attributed the cause to a broken rail and noted "From January 1, 1940 to June 30, 1944,
this railroad has reported to the Commission 61 accidents caused either directly or indirectly by
broken rails. "  Of course, ACL was using 100# rail at the time.  Most of it had been rolled by Tennessee
Coal, Iron & RR Co. in the 1920s. Believe the R-1 eight-axle tenders came to Roanoke to be converted into canteens.                                         Harry Bundy

 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-mailing-list/attachments/20130626/d2ccf62a/attachment.htm>


More information about the NW-Mailing-List mailing list