Class A speed limit in passenger service

NW Mailing List nw-mailing-list at nwhs.org
Fri Jun 15 07:04:38 EDT 2012


Louis,

Thank you very much that is helpful. Sometime when I have time I will have
to calculate how many inches of underbalance N&W allowed on the passenger
trains vs. the Class A's compared to current FRA requirements for
super-elevation in curves.

Thanks again,

John Rhodes

On Thu, Jun 14, 2012 at 8:28 PM, NW Mailing List
<nw-mailing-list at nwhs.org>wrote:


> According to employee timetables from the steam era, under the subject

> SPEED LIMIT SIGNALS AT APPROACH TO CURVES, "Passenger trains handled or

> assisted by Class A engines will reduce speed to five miles per hour less

> than passenger train speed shown on the disc." In other words, the A's

> could run at the maximum authorized speed for passenger trains, except for

> example, on a "60/50" curve, they were restricted to 55 MPH.

>

> Before the ICC imposed speed limits there were no speed restrictions on

> certain portions of the N&W; for example, east of Poe on the Norfolk

> Division, except for curves and other restricted areas such as certain

> incorporated towns.

>

> Louis Newton

>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-mailing-list/attachments/20120615/e135e93f/attachment.htm>


More information about the NW-Mailing-List mailing list