Lambert's Point Turntable

nw-mailing-list at nwhs.org nw-mailing-list at nwhs.org
Wed Jul 21 08:55:56 EDT 2004


The Lamberts Point turntable is NOT a thru truss.  Is is a 100' plate-girder turntable.
Jerry Kay, Portsmouth, Va.

-------------- Original message from nw-mailing-list at nwhs.org: -------------- 
> Thanks to all for their help. I want to model the last version of that 
> turntable, which was of the THRU-TRUSS type. Yesterday, I did what one 
> of you suggested and tried to scale the photos I have. The problem is 
> that all of my photos are angled in such a way that it is difficult to 
> determine dimensions. I estimated that the main truss has a height at 
> the center of 8 feet (4 feet above and 4 feet below the rail bottom.) 
> If I could get that dimension and how far the truss goes down into the 
> pit on each end, it would make for a better construction drawing. I 
> assume that the last turntable (1913) mentioned by Gordon Hamilton as 
> being 100' long is what I want for length. 
> 
> Is that turntable still in existence, wow, I am amazed! I was 
> stationed from 1956 to 1959 at the Mine Warfare School, when it was at 
> Yorktown. I spent many, many enjoyable weekends with my Nikon S1 and 
> Bolex following the N&W. 
> 
> Ron Peisker 
> 
> ________________________________________ 
> NW-Mailing-List at nwhs.org 
> http://list.nwhs.org/mailman/options/nw-mailing-list 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/mailman/private/nw-mailing-list/attachments/20040721/52661823/attachment-0001.html


More information about the NW-Mailing-List mailing list